Shop

Showing 1–36 of 50 resultsSorted by price: high to low

For HireCurrently on Hire
4Hire 4500MAX AUGER DRIVE Skid Steer
AUGER TORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE 65mm Drive Augers from 100mm up to 900mm. Flow rate 50-95l/m
Read More
- AUGER TORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE
- 65mm Drive
- Augers from 100mm up to 900mm. Flow rate 50-95l/m
Price range: $150.00 through $750.00 Plus GST
SKU: SB230834GS
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
SOLD OUT _ More Stock Arriving Soon

AU MB30 cement mixer HYD Motor Part 22
AU MB30 cement mixer Motor Part 22
Read More
AU MB30 cement mixer Motor Part 22
$750.00 Plus GST
SKU: AU25MB30SKIDMIXERPART22
Out of stock
Add to Quote
For Hire
4hire PD4-2 Auger Drive Skid Steer
Digga PD4-2 Auger Drive 65mm Round Drive Augers Range from 100mm up to 900mm
Read More
- Digga PD4-2 Auger Drive
- 65mm Round Drive
- Augers Range from 100mm up to 900mm
Price range: $150.00 through $750.00 Plus GST
SKU: SG210510
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
SOLD OUT _ More Stock Arriving Soon

Komatsu Motor Grader Scarifier Shank – 232-785-1291
$700.00 Plus GST
SKU: 232-785-1291
Out of stock
Add to Quote
195-78-71380 – Komatsu style D375 Ripper Nose (195-78-71380HX)
AU GET supplied by AU Buckets & Equipment Part #195-78-71380, also known as 195-78-71380HX, is a heavy-duty Komatsu-style ripper nose designed for D375 bulldozer ripper...
Read More
AU GET supplied by AU Buckets & Equipment

Part #195-78-71380, also known as 195-78-71380HX, is a heavy-duty Komatsu-style ripper nose designed for D375 bulldozer ripper shanks. This component serves as the core connection point for mounting ripper teeth, bushings, and pins—built to withstand the intense forces of deep ripping in quarrying, mining, and bulk earthworks.

Product Specifications:
- Part Number: 195-78-71380 / 195-78-71380HX
- Type: Ripper Nose / Tooth Holder
- Machine Compatibility: Komatsu D375 dozer
- Material: High-strength cast steel (HX = heavy-duty, extra hard)
- Mounting: Weld-on to ripper shank
- Compatible With: D375 series ripper teeth, pins, and retainers
Key Features:
- Precision-fit for Komatsu D375 rippers
- Reinforced heavy-duty (HX) variant for extreme wear resistance
- Weld-on nose provides a solid base for ripper point installation
- Designed to accept side-lock pin and bushing systems
AU GET supplied by AU Buckets & Equipment – built to anchor your toughest ripping gear.
$600.00 Plus GST
SKU: 195-78-71380
Available: 4
Add to Quote
9W8365 – CAT style D9 & D10 Ripper Guard suits 90mm Shank
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$500.00 Plus GST
SKU: 9W8365
Available: 28
Add to Quote
AU MB30 cement mixer spare part-Cylinder
AU MB30 cement mixer Cylinder PART 39
Read More
AU MB30 cement mixer Cylinder PART 39
$450.00 Plus GST
SKU: AU25MB30SKIDMIXPART39
Available: 4
Add to Quote
8E1848 – CAT style D8 & D9 Ripper Guard 80mm
AU GET supplied by AU Buckets & Equipment Part #8E1848 is a CAT style ripper shank guard designed to suit Caterpillar D8 and D9 dozers,...
Read More
AU GET supplied by AU Buckets & Equipment

Part #8E1848 is a CAT style ripper shank guard designed to suit Caterpillar D8 and D9 dozers, providing 80 mm wide wear protection to the ripper shank. Engineered for high-impact applications, this guard shields the shank from excessive wear during aggressive ripping in rock, frost, and hardpan.

Product Specifications:
- Part Number: 8E1848
- Machine Fitment: CAT D8, D9
- Component Type: Ripper Guard / Shank Protector
- Width: 80 mm
- Application: Rock ripping, quarry work, mining, heavy construction
- Material: Abrasion-resistant, heat-treated alloy steel
- Mounting: Weld-on or mechanical fit (based on shank style)
Key Features:
- Protects ripper shank from premature wear and damage
- Extends the service life of your ripping equipment
- Compatible with OEM Caterpillar D8/D9 rippers and AU Buckets shanks
- Built tough for demanding, high-impact excavation conditions
AU GET supplied by AU Buckets & Equipment – protect your ripper, power through the job.
$350.00 Plus GST
SKU: 8E1848
Available: 10
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Hydraulic cylinder to suit Skidsteer AU Rake/Grapple bucket – AUSKIDGRAPPLECYL
Hydraulic cylinder to suit Skidsteer AU Rake/Grapple bucket SP000251
Read More
Hydraulic cylinder to suit Skidsteer AU Rake/Grapple bucket

SP000251
$350.00 Plus GST
SKU: AUSKIDGRAPPLECYL
Out of stock
Add to Quote
4T5502-F – FORGED STEEL CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$300.00 Plus GST
SKU: 4T5502-F
Out of stock
Add to Quote
9U9694 – CAT style D9 Ripper Nose 2 Hole
AU GET supplied by AU Buckets & Equipment Part #9U9694 is a CAT style ripper nose designed to suit Caterpillar D9 dozers. Featuring a 2-hole...
Read More
AU GET supplied by AU Buckets & Equipment

Part #9U9694 is a CAT style ripper nose designed to suit Caterpillar D9 dozers. Featuring a 2-hole mounting system, this heavy-duty nose securely holds R450 or R500 series ripper tips for extreme ripping applications in rock, hardpan, and compacted material. It’s built to withstand high breakout forces while maintaining precise tip alignment.

Product Specifications:
- Part Number: 9U9694
- Machine Fitment: CAT D9 Dozer
- Component Type: Ripper Nose (2-Hole)
- Tooth Compatibility: R450 / R500 Series tips (e.g., 4T5501, 4T5502)
- Mounting Style: 2-hole mechanical fit
- Material: High-strength, heat-treated cast alloy steel
- Application: Rock ripping, quarry work, mining, heavy civil
Key Features:
- Precision 2-bolt mounting for secure, vibration-resistant installation
- Designed for use with CAT D9 ripper shanks
- Compatible with OEM and AU Buckets ripper teeth and components
- Built to deliver maximum performance and longevity in extreme conditions
AU GET supplied by AU Buckets & Equipment – lock in your tooth, unleash your ripper.
$300.00 Plus GST
SKU: 9U9694
Available: 3
Add to Quote
9J6586 – CAT style D4 Straight Ripper Shank
AU GET supplied by AU Buckets & Equipment Part #9J6586 is a CAT style straight ripper shank designed specifically for the Caterpillar D4 dozer. Built...
Read More
AU GET supplied by AU Buckets & Equipment

Part #9J6586 is a CAT style straight ripper shank designed specifically for the Caterpillar D4 dozer. Built for light to moderate ripping applications, it delivers consistent performance in compacted soils, clay, and light rock. Its straight profile provides excellent penetration and control during surface preparation and trenching.

Product Specifications:
- Part Number: 9J6586
- Machine Fitment: CAT D4 Dozer
- Component Type: Straight Ripper Shank
- Application: Light ripping, surface prep, trenching, compacted soil
- Material: Heat-treated, high-tensile alloy steel
- Compatible Tips: J200 or D4-series ripper tips (e.g., 6Y5230, 8E7300 nose + tooth assemblies)
Key Features:
- Straight shank profile for controlled ripping in moderate ground
- Built for durability and impact resistance
- Fully compatible with CAT OEM rippers and AU Buckets tip systems
- Ideal for contractors and earthmovers working in construction and utility environments
AU GET supplied by AU Buckets & Equipment – rip clean, rip confident.
$300.00 Plus GST
SKU: 9J6586
Available: 5
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 17
Add to Quote
4T5501 – CAT style R500 / D10 Ripper Penetration Short
AU GET supplied by AU Buckets & Equipment Part #4T5501 is a CAT style R500 series ripper penetration short tooth, built for extreme ground conditions...
Read More
AU GET supplied by AU Buckets & Equipment

Part #4T5501 is a CAT style R500 series ripper penetration short tooth, built for extreme ground conditions where maximum force and breakout power are essential. With a reinforced design and short profile, it is perfect for aggressive ripping in quarrying, mining, and heavy earthmoving.

Product Specifications:
- Part Number: 4T5501
- Series: CAT R500
- Tooth Type: Ripper Penetration – Short
- Bolt Diameter: 0.75"
- Thickness: 8.604"
- Width: 6.156"
- Length: 15"
- Material: High-strength, heat-treated alloy steel
Key Features:
- Short, heavy-duty design for maximum ground penetration
- Engineered to withstand high-impact and abrasive conditions
- Fits standard CAT R500 ripper setups
- Fully compatible with OEM CAT and AU Buckets R500 series systems
AU GET supplied by AU Buckets & Equipment – built for deep ripping power when you need it most.
$240.00 Plus GST
SKU: 4T5501
Available: 2
Add to Quote
195-78-71320 Ripper Tooth Point Fit For Komatsu Motor Grader
$240.00 Plus GST
SKU: 195-78-71320
Available: 12
Add to Quote
4T4502 – CAT style D10 Ripper Centreline
AU GET supplied by AU Buckets & Equipment This Caterpillar-style ripper bucket tooth is designed for the D10 dozer ripper groups and R500 series attachments,...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style ripper bucket tooth is designed for the D10 dozer ripper groups and R500 series attachments, delivering maximum penetration and durability in the most extreme ripping and excavation environments. Ideal for heavy quarrying, mining, and bulk earthmoving, it’s built to withstand high-impact forces and abrasive wear.

Product Specifications:
- Machine Fitment: Caterpillar D10 / R500 series
- Tooth Type: Ripper Bucket Tooth
- Application: Heavy ripping, rock excavation, mining
- Material: Heat-treated, high-strength alloy steel
- Mounting System:
  
  Pin: 6Y3909
  
  Retainer: 4T4707 (sleeved style)
Key Features:
- Aggressive ripper tooth profile for maximum ground penetration
- Built to perform in extreme-impact and high-abrasion conditions
- Secure mounting with 6Y3909 pin and 4T4707 retainer system
- Compatible with OEM CAT D10 rippers and AU Buckets R500 series assemblies
AU GET supplied by AU Buckets & Equipment – engineered to rip deep and last longer.
$230.00 Plus GST
SKU: 4T4502
Available: 12
Add to Quote
4T4501 – CAT style D10/D11/R500 Ripper Centreline Short
AU GET supplied by AU Buckets & Equipment Part #4T4501 is a CAT style R500 centerline short tooth, designed for heavy-duty ripping and penetration applications....
Read More
AU GET supplied by AU Buckets & Equipment

Part #4T4501 is a CAT style R500 centerline short tooth, designed for heavy-duty ripping and penetration applications. Built for maximum strength and direct ground engagement, it’s ideal for dozers, large excavators, and ripping equipment operating in the harshest conditions.

Product Specifications:
- Part Number: 4T4501
- Series: CAT R500
- Tooth Type: Centerline Short Tooth
- Bolt Diameter: 0" (bolt system not applicable – typically pinned)
- Thickness: 8.624"
- Width: 6.169"
- Length: 14.76"
- Material: Heat-treated, high-strength alloy steel
Key Features:
- Short, reinforced design for concentrated force and breakout power
- Engineered for high-impact and abrasive digging conditions
- Suits large equipment using the R500 series ripper group
- Fully compatible with OEM CAT R500 setups and AU Buckets GET systems
AU GET supplied by AU Buckets & Equipment – built to tear through the toughest terrain.
$230.00 Plus GST
SKU: 4T4501
Available: 3
Add to Quote
4T5502 – CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$230.00 Plus GST
SKU: 4T5502
Available: 3
Add to Quote
SOLD OUT _ More Stock Arriving Soon

AU MB30 cement mixer spare part-Chain
AU MB30 cement mixer Chain PART 11
Read More
AU MB30 cement mixer Chain PART 11
$220.00 Plus GST
SKU: AU25MB30SKIDMIXPART11
Out of stock
Add to Quote
175-78-31230-F – Komatsu-Style Forged Ripper Bucket Tooth
$200.00 Plus GST
SKU: 175-78-31230-F
Available: 8
Add to Quote
7 TYNE SKID RIPPER BUNDLE – FULL TOOTH REPLACEMENT SET
Replace your worn ripper teeth with this 7 Tyne Skid Ripper Bundle, designed for reliable performance in tough ground conditions. This package provides a complete...
Read More
Replace your worn ripper teeth with this 7 Tyne Skid Ripper Bundle, designed for reliable performance in tough ground conditions. This package provides a complete set of heavy-duty scarifier teeth, ready to install and get your machine back to work. Kit Includes: 7 x Heavy Duty Scarifier Teeth - 6Y5230HD (Full set for 7 tyne skid ripper) Application: Hard ground ripping Site prep and earthworks Breaking compacted material General skid steer ripper work Key Features: Complete replacement set – no mixing old and new Durable, heavy-duty design for high impact use Quick and easy changeout Keeps your machine operating efficiently Supply: This item is AU GET supplied by AU Buckets & Equipment. Stocked at our Welshpool WA warehouse and ready for dispatch. Need help confirming fitment or bulk supply? Contact today on 0421 232 232
$160.00 Plus GST
SKU: 7tynerip_tooth_bundle
Add to Quote
8E7350 – Weld On Ripper Nose R350 / D6 / D7
The 8E7350 is a weld-on ripper shank repair nose adapter designed for Caterpillar R350 / D6 / D7 rippers. It is used to restore worn...
Read More
The 8E7350 is a weld-on ripper shank repair nose adapter designed for Caterpillar R350 / D6 / D7 rippers. It is used to restore worn ripper shanks or bucket lip shanks, allowing continued use of R350 teeth without replacing the entire shank. Built from high-strength alloy steel, this repair nose is engineered to handle the shock and abrasion of ripping in quarries, hard clay, and rocky ground.
$150.00 Plus GST
SKU: 8E7350
Available: 1
Add to Quote
9W2452 – CAT style D8 & D9 Ripper Centreline Intermediate
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
Read More
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
$150.00 Plus GST
SKU: 9W2452
Available: 14
Add to Quote
SOLD OUT _ More Stock Arriving Soon

V51VY – ESC0-Style V-Series Single Tiger Tooth
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
Read More
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
$150.00 Plus GST
SKU: V51VY
Out of stock
Add to Quote
For HireCurrently on Hire
4hire 4.5T PD3-2 Auger Drive SKID STEER
Digga PD3-2 Auger Drive 65mm Round Drive Augers Range from 100mm up to 600mm
Read More
- Digga PD3-2 Auger Drive
- 65mm Round Drive
- Augers Range from 100mm up to 600mm
$150.00 Plus GST
SKU: SB210501
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
SOLD OUT _ More Stock Arriving Soon

D85C RIPPER BOOT FOR AU RIPPERS
Ripper boots, suit D85, D135, D150, D155. . To suit 13-20t rippers and some buckets
Read More
Ripper boots, suit D85, D135, D150, D155. . To suit 13-20t rippers and some buckets
$150.00 Plus GST
SKU: AU80TOOTHD85
Out of stock
Add to Quote
SOLD OUT _ More Stock Arriving Soon
4T5452 – CAT style D8 & D9 / R450 Ripper Penetration
AU GET supplied by AU Buckets & Equipment This Caterpillar-style ripper bucket tooth is built for the R450 series, providing powerful penetration and outstanding durability...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style ripper bucket tooth is built for the R450 series, providing powerful penetration and outstanding durability for demanding ripping and excavation work. Designed for tough ground conditions, it’s ideal for heavy construction, quarrying, and mining operations.

Product Specifications:
- Series: CAT R450
- Tooth Type: Ripper Bucket Tooth
- Application: Heavy ripping, hard rock excavation, high-impact digging
- Material: Heat-treated, high-strength alloy steel
- Mounting System:
  
  Pin: 6Y3394
  
  Retainer: 8E5559 (sleeved style)
Key Features:
- Reinforced design for extreme wear and impact resistance
- Aggressive ripper profile for deep, efficient penetration
- Quick and secure installation with 6Y3394 pin and 8E5559 retainer
- Compatible with OEM CAT R450 ripper shanks and AU Buckets systems
AU GET supplied by AU Buckets & Equipment – tough enough to rip through the toughest ground.
$135.00 Plus GST
SKU: 4T5452
Out of stock
Add to Quote
SOLD OUT _ More Stock Arriving Soon

175-78-31230 – Komatsu-Style Ripper Bucket Tooth
$130.00 Plus GST
SKU: 175-78-31230
Out of stock
Add to Quote
R450 Caterpillar Bucket Tooth – D8 / D9
Caterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer.
Read More
Caterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer.
$130.00 Plus GST
SKU: 9W2451
Available: 10
Add to Quote
SOLD OUT _ More Stock Arriving Soon

6Y0359 – CAT style D6 & D7 Ripper Penetration
Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer.
Read More
Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer.
$130.00 Plus GST
SKU: 6Y0359
Out of stock
Add to Quote
E35R14-2 – ESC0 style 35 Series Uni-Lok Ripper Boot
AU GET supplied by AU Buckets & Equipment Part #E35R14-2 is an ESC0-style Uni-Lok ripper boot designed for use with the 35 Series GET system....
Read More
AU GET supplied by AU Buckets & Equipment

Part #E35R14-2 is an ESC0-style Uni-Lok ripper boot designed for use with the 35 Series GET system. This component provides a high-strength interface between the ripper shank and the tooth assembly, offering exceptional impact resistance and durability in harsh ripping environments.

Product Specifications:
- Part Number: E35R14-2
- Style: ESC0 Uni-Lok 35 Series
- Application: Ripper boot for shank protection and tooth assembly support
- Material: Hardened, wear-resistant alloy steel
- Mounting: Weld-on or bolt-on depending on shank configuration
- Compatible With: ESC0 35 Series pins, locks, and bushes (e.g., E35PN, E35-40LK, E35RB)
Key Features:
- Reinforces and protects the lower end of ripper shanks
- Provides a precise housing for Uni-Lok components
- Withstands extreme forces in mining, quarrying, and heavy ripping
- Compatible with both OEM ESC0 and AU Buckets ripper setups
AU GET supplied by AU Buckets & Equipment – rip harder, rip longer, with boots that don't back down.
$125.00 Plus GST
SKU: E35R14
Available: 4
Add to Quote
AU MB30 cement mixer spare part-bearing base
AU MB30 cement mixer bearing base PART 2
Read More
AU MB30 cement mixer bearing base PART 2
$110.00 Plus GST
SKU: AU25MB30SKIDMIXPART2
Available: 1
Add to Quote
Komatsu Ripper Tooth Point – GD555, GD605, GD623,GD625,GD655,GD675
$70.00 Plus GST
SKU: 234-785-1121
Available: 20
Add to Quote
22 SERIES UNI-LOK RIPPER
ripper bucket tooth for a 22 series; takes a 22RP pin and a 22RB bushing
Read More
ripper bucket tooth for a 22 series; takes a 22RP pin and a 22RB bushing
$70.00 Plus GST
SKU: E22R10
Available: 4
Add to Quote
AU MB30 cement mixer spare part-Bearing
AU MB30 cement mixer Bearing PART 7
Read More
AU MB30 cement mixer Bearing PART 7
$65.00 Plus GST
SKU: AU25MB30SKIDMIXPART7
Available: 2
Add to Quote
AU MB30 cement mixer HYD Motor oil seal
AU MB30 cement mixer Motor oil seal Part22 Seal
Read More
AU MB30 cement mixer Motor oil seal Part22 Seal
$60.00 Plus GST
SKU: AU25MB30SKIDMIXPART22SEAL
Available: 4
Add to Quote

Showing 1–36 of 50 resultsSorted by price: high to low

Shop

James Johnson

Jane Doe

John Smith

Quick Links

Contact Us

Subscribe to our newsletter