Shop

Showing all 10 resultsSorted by price: high to low

Sea Container 20 Foot Half Height
SEA CONTAINER 6M or 20 Foot , Used 20 ft open-top half height container with removable steel roof. Have doors on the end for access...
Read More
SEA CONTAINER 6M or 20 Foot ,
- Used 20 ft open-top half height container with removable steel roof.
- Have doors on the end for access thus drive in , other end is set for swinging down like a truck tipper.
- Made by Seabox International.
- Length (external) 6050 mm,
- Width (external, including roof locking) 2440 mm,
- Height (external) 1360 mm,
- Maximum Gross Weight (MGW) 30,500 kg,
- Tare Weight 2900 kg,
- Maximum Payload 27,600 kg,
- Capacity 15 m3.
- 10 available located in holding yard South Guildford WA ,
- Internal dimensions L W H mm, 5680 mm x 2260 mm x 1200 mm
- they have braces at bottom and top , flat steel floor ( No wood)
- call pre inspection
$5,250.00 Plus GST
SKU: SG240701
Available: 2
Add to Quote
For Hire
4Hire AU 20-35T Hydraulic Magnet with teeth
AU 1300 Size Magnet with teeth Magnet works on the hammer lines off your excavator Have various head brackets to suit Must be operated in...
Read More
- AU 1300 Size Magnet with teeth
- Magnet works on the hammer lines off your excavator
- Have various head brackets to suit
- Must be operated in rock breaker mode, No case drain line required
- Flow Rate 120L/m, Max Pressure 200 Bar
- J350 Teeth Fitted
- Tare Weight 2400kg
Price range: $350.00 through $1,750.00 Plus GST
SKU: AU25MAGNET1300-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
Price range: $350.00 through $1,750.00 Plus GST
SKU: HYHMGT1100
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire HMGT1300 Hydraulic Magnet with teeth
HMGT1300 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1300 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
- Flow Rate 100-120L/m Max. Pressure 200Bar Max. Must be operated in Rock Breaker Mode
Price range: $350.00 through $1,750.00 Plus GST
SKU: HYHMGT1300
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraram HMGT1300 Hydraulic Magnet with teeth
HMGT1300 Hydraulic Magnet with teeth. Suit 26-32T excavator, Various head brackets to suit These Magnets work on the hammerlines of your excavator so they only...
Read More
- HMGT1300 Hydraulic Magnet with teeth.
- Suit 26-32T excavator, Various head brackets to suit
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger
- Flow Rate 100-120L/m Max. Pressure 200Bar Max. Must be operated in Rock Breaker Mode
Price range: $350.00 through $1,750.00 Plus GST
SKU: 23HYHMGT1300-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
Price range: $350.00 through $1,750.00 Plus GST
SKU: 23HYHMGT1100-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
Price range: $350.00 through $1,750.00 Plus GST
SKU: 23HYHMGT1100-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire HMGT950 Hydraulic Magnet with teeth
HMGT950 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT950 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
Price range: $300.00 through $1,500.00 Plus GST
SKU: 23HYHMGT950-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
116-7461 – Caterpillar Style Half Arrow Loader Segment (LH, Non-Reversible)
$480.00 Plus GST
SKU: 116-7461
Available: 6
Add to Quote
116-7460 – Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$450.00 Plus GST
SKU: 116-7460
Available: 2
Add to Quote

Showing all 10 resultsSorted by price: high to low

Shop

James Johnson

Jane Doe

John Smith

Quick Links

Contact Us

Subscribe to our newsletter