Shop

Showing 1–36 of 63 resultsSorted by price: high to low

2010 HYUNDAI HL757-7A WHEEL LOADER
• 2010 Hyundai HL757-7A 14.5 tonne articulated wheel loader, 5435 hours • 2.7 M3, 2710mm wide GP bucket with cutting edge, quick hitch, Z bar...
Read More
• 2010 Hyundai HL757-7A 14.5 tonne articulated wheel loader, 5435 hours • 2.7 M3, 2710mm wide GP bucket with cutting edge, quick hitch, Z bar linkage boom • Cummins QSB6.7, 6-cylinder turbo diesel 133 kW, ZF powershift 4 speed transmission • Features & accessories: air con, power shift transmission, wet disc brakes, adjustable steering column, ex Government DBCA, set for firefighting, forestry guards over cabin, engine bay, windows and lights, heavy duty belly guards and fuel tank guards, beacon, battery isolator, work lights, backup alarm • Drive Axles: 4-wheel drive ZF axles, rear limited slip diff • Service Brakes: wet disc brakes Tyre Size: Front & Rear 20.5R25 • Park brake: spring applied, hydraulic release disc brake on transmission • Lift Capacity: 3175 kg Lift safety valves are not fitted to loader • Controls: joystick No auxiliary hydraulics are fitted to loader • Service History: just serviced, no previous service history, ex Government DBCA • Repairs Required: fire suppression requires service (out of date), bucket pins and bushes worn, cutting edge worn, heel plates worn • Condition: good condition, runs well
$77,500.00 Plus GST
SKU: SBL250401
Available: 1
Add to Quote
2010 Caterpillar 950H Wheel Loader
Serial No: CAT0950HVNIA04180 Flat Edge GP Bucket Auto Lube 23138 hours Western Australia Rego: IHNE995 Service History Below Located Malaga Call for Inspection
Read More
- Serial No: CAT0950HVNIA04180
- Flat Edge GP Bucket
- Auto Lube
- 23138 hours
- Western Australia Rego: IHNE995
- Service History Below
Located Malaga Call for Inspection
$67,000.00 Plus GST
SKU: WL39
Available: 1
Add to Quote
2007 JCB 411 HT (T2) WHEEL LOADER
2007 JCB 411HT (T2) 8.5 tonne wheel loader suits 1.2 m3 bucket (to be supplied) Twin loader frame arms, high torque parallel lift with quick...
Read More
- 2007 JCB 411HT (T2) 8.5 tonne wheel loader suits 1.2 m3 bucket (to be supplied)
- Twin loader frame arms, high torque parallel lift with quick hitch, auxiliary hydraulics
- JCB 4-cylinder turbo diesel engine, JCB powershift 4 speed transmission
- Features & accessories: air con cab, wet disc brakes, adjustable steering column, battery isolator, backup alarm, beacon, work lights, e-stop, safety valves on boom and tilt cylinders lift hydraulics.
- Hour meter (Hrs Showing): 5298 hours Weight: 8600 kg Condition: runs well
- Service Brakes: wet disc Park brake: dry disc with lever
- Controls: joystick
- Colour (Exterior): yellow
- Tyre Size: Front & Rear: 15.5 x 25
- Battery Voltage: 24 volts
- Service History: yes, last service 5046 hours 24/9/23
$60,000.00 Plus GST
SKU: CAPE_LD44
Available: 1
Add to Quote
For Hire Currently on Hire
4Hire Embrey Hydraulic Rotary Steel Shear 18 to 30ton
Embrey EDS18R Hydraulic Rotary Steel Shear Suits 18 to 30T excavator We have multiple head brackets to suit your machine Jaw opening 562mm, Jaw depth...
Read More
- Embrey EDS18R Hydraulic Rotary Steel Shear
- Suits 18 to 30T excavator
- We have multiple head brackets to suit your machine
- Jaw opening 562mm, Jaw depth 574mm
- Requires 2 sets of hydraulic lines
- Weight 1700kg
- Spare blades available
- Case drain required
$6,000.00 Plus GST
SKU: SB250603
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraulic Steel Shear 15 to 30 ton
Hydraram HSS22RV, 360 degree rotation Steel Shear only, not suitable for concrete Suits 15 to 35T machines Have Multiple head bracket to suit your machine...
Read More
- Hydraram HSS22RV, 360 degree rotation
- Steel Shear only, not suitable for concrete
- Suits 15 to 35T machines
- Have Multiple head bracket to suit your machine
- Requires 2 sets of hydraulic lines
- No case drain required
- Jaw Opening 535mm
- Weight 2300kg
$6,000.00 Plus GST
SKU: HYHSS22RV
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Hydraulic Multi Jaw Steel Shear 8 to 18 ton
Hydraram MK10 Multi Steel Jaw 360 degree rotation Not suitable for concrete Has Interchangeable Steel & Pulverizer Jaws available Have Multiple head bracket to suit...
Read More
- Hydraram MK10 Multi Steel Jaw
- 360 degree rotation
- Not suitable for concrete
- Has Interchangeable Steel & Pulverizer Jaws available
- Have Multiple head bracket to suit your machine
- Requires 2 sets of hydraulic lines
- No case drain required
- Jaw opening 340mm
- Weight 1000kg
$5,000.00 Plus GST
SKU: HYMK10STEELJAW
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4Hire Hydraulic Steel Shear 8 to 12 ton
Hydraram HSS10RV, 360 degree rotation Steel Shear only, not suitable for concrete Suits 8 to 12T machines Requires 2 sets of hydraulic lines No case...
Read More
- Hydraram HSS10RV, 360 degree rotation
- Steel Shear only, not suitable for concrete
- Suits 8 to 12T machines
- Requires 2 sets of hydraulic lines
- No case drain required
- Have Multiple head bracket to suit your machine
- Jaw Opening 405mm
- Weight 1100kg
$4,000.00 Plus GST
SKU: HYHSS10RV
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraulic Pulverizer 15 to 30 ton
Hydraram HFP22RV Hydraulic Pulveriser-360 Rotation Have Multiple head bracket to suit your machine Requires 2 sets hydraulic lines No case drain required Jaw opening 825mm...
Read More
- Hydraram HFP22RV Hydraulic Pulveriser-360 Rotation
- Have Multiple head bracket to suit your machine
- Requires 2 sets hydraulic lines
- No case drain required
- Jaw opening 825mm
- Weight 2500kg
$4,000.00 Plus GST
SKU: HYHFP22RV
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Hydraulic Multi Jaw Pulverizer 8 to 18 ton
Hydraram MK10 Multi Crusher Jaw 360 degree rotation Requires 2 sets of hydraulic lines No case drain required Has Interchangeable Steel & Pulverizer Jaws available...
Read More
- Hydraram MK10 Multi Crusher Jaw
  
  360 degree rotation
  
  Requires 2 sets of hydraulic lines
  
  No case drain required
  
  Has Interchangeable Steel & Pulverizer Jaws available
  
  Have Multiple head bracket to suit your machine
  
  Jaw opening 660mm
  
  Weight 1100kg
$4,000.00 Plus GST
SKU: HYMK10PULJAW-1
Add to Quote This product has multiple variants. The options may be chosen on the product page
80 Tree Shear Hydraulic Cylinder – AU80TREESHEARCYL
AU Tree Shear Bucket Cylinders to fit 80 pin Tree Shear. (20 Ton)
Read More
AU Tree Shear Bucket Cylinders to fit 80 pin Tree Shear. (20 Ton)
$3,500.00 Plus GST
SKU: AU80TREESHEARCYL
Available: 1
Add to Quote
65 Tree Shear Hydraulic Cylinder – AU65TREESHEARCYL
AU Tree Shear Bucket Cylinders to fit 65 pin Tree Shear. (13 Ton)
Read More
AU Tree Shear Bucket Cylinders to fit 65 pin Tree Shear. (13 Ton)
$3,000.00 Plus GST
SKU: AU65TREESHEARCYL
Available: 1
Add to Quote
For HireCurrently on Hire
4hire Hydraulic Rubber/Tyre Shear 13-22T
Hydraram HMR15V Shear Shear for cutting plastic, polypipe, wood & tyres only Suited to 13-22 ton excavator Requires 1 set Hydraulic lines No case drain...
Read More
- Hydraram HMR15V Shear
- Shear for cutting plastic, polypipe, wood & tyres only
- Suited to 13-22 ton excavator
- Requires 1 set Hydraulic lines
- No case drain required
- Jaw opening 780mm
- Have Multiple head bracket to suit your machine
- Weight 1500kg
$3,000.00 Plus GST
SKU: 23HYHMR-15V-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Labounty MPS 20R Tank Shear
Labounty MPS 20R Tank Shear, Blade opening 360mm. Has 90mm top pin, 80mm rear pin, 390mm ibe and 485mm cp to cp
Read More
- Labounty MPS 20R Tank Shear,
- Blade opening 360mm.
- Has 90mm top pin,
- 80mm rear pin,
- 390mm ibe and 485mm cp to cp
$2,500.00 Plus GST
SKU: SB191105
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Rotary Drum Cutter to suit 20-40 Ton
Simex TF1000 hydraulic rotary cutter Suit 20T, 30T or 40T diggers Have Multiple head bracket to suit your machine Drum Width 900mm Wheel Diameter 660mm...
Read More
- Simex TF1000 hydraulic rotary cutter
- Suit 20T, 30T or 40T diggers
- Have Multiple head bracket to suit your machine
- Drum Width 900mm
- Wheel Diameter 660mm
- Oil flow rate 170-250 L/m
- Weight 1700kg
- 48 Teeth Fitted
- Requires a Case drain on machine
Price range: $440.00 through $2,200.00 Plus GST
SKU: SB200303
Add to Quote This product has multiple variants. The options may be chosen on the product page
FOR HIRE
4Hire Hydraulic Pulveriser 6-10 ton
Hydraram HFP7V Hydraulic Pulveriser-Fixed Head Have Multiple head bracket to suit your machine Requires 1 set of hydraulic lines No case drain required Jaw opening...
Read More
- Hydraram HFP7V Hydraulic Pulveriser-Fixed Head
- Have Multiple head bracket to suit your machine
- Requires 1 set of hydraulic lines
- No case drain required
- Jaw opening 475mm
- Weight 800kg
Price range: $400.00 through $2,000.00 Plus GST
SKU: 23HYHFP7V-1
Add to Quote This product has multiple variants. The options may be chosen on the product page
FOR HIRE
4Hire Hydraulic Shear to suit 8-10T
Hydraulic shear Suit 8-10T excavator 60mm pins, 215mm ibe and 300mm cp to cp Manual Rotation No case drain required
Read More
- Hydraulic shear
- Suit 8-10T excavator
- 60mm pins, 215mm ibe and 300mm cp to cp
- Manual Rotation
- No case drain required
$2,000.00 Plus GST
SKU: SB240331
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire SANDVIK Hydraulic Pulveriser 20-40 TON
SANDVIK RAMMER BC 2019 360 Degree Rotation Have Multiple head bracket to suit your machine Requires 2 sets hydraulic lines No Case Drain required Jaw...
Read More
- SANDVIK RAMMER BC 2019
- 360 Degree Rotation
- Have Multiple head bracket to suit your machine
- Requires 2 sets hydraulic lines
- No Case Drain required
- Jaw opening 850mm
- Weight 2500kg
Price range: $400.00 through $2,000.00 Plus GST
SKU: SB150806
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Sale

Shear, 245mm wide manual grab/shear bracket, 90mm pin hole
AU Used Shear, 245mm wide manual grab/shear bracket, 90mm pin hole
Read More
AU Used Shear, 245mm wide manual grab/shear bracket, 90mm pin hole
$1,800.00 Plus GST
SKU: SB210835GS
Available: 1
Add to Quote
For Sale

Shear, 2040mm long arm bar for manual grab/shear
AU Used Shear, 2040mm long arm bar for manual grab/shear, 90/80mm pin holes, 1870mm cp to cp
Read More
AU Used Shear, 2040mm long arm bar for manual grab/shear, 90/80mm pin holes, 1870mm cp to cp
$1,500.00 Plus GST
SKU: SB210834GS
Available: 1
Add to Quote
For Sale

2360mm long arm bar for manual grab/shear
AU Used Shear, 2360mm long arm bar for manual grab/shear, 90/80mm pin holes, 2200mm cp to cp
Read More
AU Used Shear, 2360mm long arm bar for manual grab/shear, 90/80mm pin holes, 2200mm cp to cp
$1,500.00 Plus GST
SKU: SB210833GS
Available: 1
Add to Quote
FOR HIRECurrently on Hire
4Hire OSA LIV15 Hydraulic Tree Shear to suit 13-20T
OSA LIV15 Hydraulic Tree shear Suits 12 to 30T Excavators, Have Multiple head brackets to suit Requires 1 set Hydraulic lines No case drain required...
Read More
- OSA LIV15 Hydraulic Tree shear
- Suits 12 to 30T Excavators, Have Multiple head brackets to suit
- Requires 1 set Hydraulic lines
- No case drain required
- Weight 1500kg
- Flow rate required 200-240 l/m
Price range: $250.00 through $1,250.00 Plus GST
SKU: SB221010
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire 20T Hydraulic Tree Shear
Hydraulic tree shear Suits 20T Excavators Requires 1 set Hydraulic lines No case drain required Can take 600mm dia logs Requires two way flow 200-240...
Read More
- Hydraulic tree shear
- Suits 20T Excavators
- Requires 1 set Hydraulic lines
- No case drain required
- Can take 600mm dia logs
- Requires two way flow
- 200-240 L/m
- Weight 1800kg
Price range: $250.00 through $1,250.00 Plus GST
SKU: AU2280ATREESHEAR-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire 13T Hydraulic Tree Shear
Hydraulic tree shear suits 13T Excavator Requires 1 set Hydraulic lines No case drain required Can take 550mm dia logs Requires two way flow 200-240...
Read More
- Hydraulic tree shear
- suits 13T Excavator
- Requires 1 set Hydraulic lines
- No case drain required
- Can take 550mm dia logs
- Requires two way flow
- 200-240 l/m
- 1150kg in weight
Price range: $250.00 through $1,250.00 Plus GST
SKU: AU2265ATREESHEAR-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
ES6697-7 – ESC0 style Heel Shroud (>500 Tonne)
AU GET supplied by AU Buckets & Equipment The ES6697-7 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside...
Read More
AU GET supplied by AU Buckets & Equipment

The ES6697-7 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside corners of excavator and loader buckets. Ideal for extreme abrasion environments, this heavy-duty shroud adds an extra layer of defense where buckets wear fastest – improving bucket life and performance in tough digging, quarrying, and mining conditions.

Product Specifications:
- Part Number: ES6697-7
- Style: ESC0 Heel Shroud
- Mounting: Weld-on
- Position: Outer bucket heel (left/right interchangeable)
- Material: High-strength, wear-resistant alloy steel
- Common Use: Excavators & loaders in abrasive or high-impact environments
Key Features:
- Reinforces bucket corners to reduce structural wear
- Helps prevent cracking and distortion of bucket sides
- Heavy-duty construction for abrasive and impact-resistant protection
- Suits a range of large-size buckets
- Easy weld-on installation
AU GET supplied by AU Buckets & Equipment – Built to protect your investment, dig after dig.
$900.00 Plus GST
SKU: ES6697-7
Available: 20
Add to Quote
ES6553 – ESC0 Style Wing Shroud / Side Protector (90mm Gap)
AU GET Supplied by AU Buckets & Equipment The ES6553 is a heavy-duty ESC0-style wing shroud, designed to protect the side walls and lower cheek...
Read More
AU GET Supplied by AU Buckets & Equipment The ES6553 is a heavy-duty ESC0-style wing shroud, designed to protect the side walls and lower cheek areas of excavator and loader buckets. With a 90mm internal gap, this weld-on shroud offers reliable protection against abrasive wear and impact in harsh working conditions. Key Features: ESC0-style wing shroud / cheek protector Suits 90mm bucket side wall gap High-strength alloy casting with abrasion-resistant profile Weld-on mounting face for permanent installation Designed to reduce bucket corner scalloping and extend service life Applications: Ideal for buckets used in mining, quarrying, and high-wear civil environments Fits large excavators and wheel loaders with compatible edge systems Often installed in conjunction with heel blocks and lip shrouds
$800.00 Plus GST
SKU: ES6553
Available: 1
Add to Quote
9W8365 – CAT style D9 & D10 Ripper Guard suits 90mm Shank
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$500.00 Plus GST
SKU: 9W8365
Available: 8
Add to Quote
ES6697-5 – ESC0 style Heel Shroud (180-400 Tonne)
AU GET supplied by AU Buckets & Equipment The ES6697-5 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside...
Read More
AU GET supplied by AU Buckets & Equipment

The ES6697-5 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside corners of excavator and loader buckets. Ideal for extreme abrasion environments, this heavy-duty shroud adds an extra layer of defense where buckets wear fastest – improving bucket life and performance in tough digging, quarrying, and mining conditions.

Product Specifications:
- Part Number: ES6697-5
- Style: ESC0 Heel Shroud
- Mounting: Weld-on
- Position: Outer bucket heel (left/right interchangeable)
- Material: High-strength, wear-resistant alloy steel
- Common Use: Excavators & loaders in abrasive or high-impact environments
Key Features:
- Reinforces bucket corners to reduce structural wear
- Helps prevent cracking and distortion of bucket sides
- Heavy-duty construction for abrasive and impact-resistant protection
- Suits a range of mid- to large-size buckets
- Easy weld-on installation
AU GET supplied by AU Buckets & Equipment – Built to protect your investment, dig after dig.
$350.00 Plus GST
SKU: ES6697-5
Available: 20
Add to Quote
ES6697-9 – ESC0 style Heel Shroud (80-180 Tonne)
AU GET supplied by AU Buckets & Equipment This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from...
Read More
AU GET supplied by AU Buckets & Equipment

This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from abrasion and impact. Made from high-strength alloy steel, it enhances bucket longevity and reduces the risk of edge failure in demanding conditions.

Product Specifications:
- Weight: 22 kg
- Recommended Excavator Size: 30–100 tonne
- Bottom Pad Thickness: 50 mm
- Bottom Pad Depth: 250 mm
- Width: 188 mm
- Height: 150 mm
- Original Manufacturer Reference: ESCO
- Machine Type: Excavator / Loader
- Common Names: Wear Shoe, Corner Wear Shoe, Bucket Protector, L Shape Protector
Key Features:
- Designed to reinforce and protect high-wear corners of machinery buckets
- Suitable for a wide range of bucket sizes and machine types
- Fabricated from abrasion-resistant alloy steel for extended wear life
- Easy to weld on for fast field installation or rebuilds
AU GET supplied by AU Buckets & Equipment – protecting your edge, preserving your power.
$300.00 Plus GST
SKU: ES6697-9
Available: 10
Add to Quote
ES5280 – ESC0 style Wing Shroud suits 40mm Cheek
AU GET supplied by AU Buckets & Equipment Part #ES5280 is an ESC0-style wing shroud designed to fit 40 mm thick bucket cheek plates, providing...
Read More
AU GET supplied by AU Buckets & Equipment

Part #ES5280 is an ESC0-style wing shroud designed to fit 40 mm thick bucket cheek plates, providing critical sidewall protection during high-impact loading, trenching, and quarry work. It extends bucket life by shielding high-wear areas against abrasion, impact, and ground contact.

Product Specifications:
- Part Number: ES5280
- Style: ESC0 Wing Shroud
- Cheek Plate Fitment: 40 mm
- Application: Sidewall protection for excavator and loader buckets
- Mounting: Weld-on
- Material: High-strength, wear-resistant alloy steel
Key Features:
- Wrap-around design guards cheek plates from excessive wear and damage
- Ideal for use in abrasive and high-impact environments
- Quick and secure weld-on installation
- Compatible with AU Buckets and OEM ESC0 protection systems
AU GET supplied by AU Buckets & Equipment – shield your sides, extend your bucket’s life.
$250.00 Plus GST
SKU: ES5280
Available: 17
Add to Quote
Sold as a Pair

096-4747/4748 – Caterpillar Sidecutters-4 BOLT (AU20TSIDECUTTRENCH)
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
Read More
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
$250.00 Plus GST
SKU: AU20TSIDECUTTRENCH
Available: 6
Add to Quote
Komatsu Heel Plate – 426-70-12142
AU GET supplied by AU Buckets & Equipment The Komatsu-style heel plate is designed to deliver extra wear protection to the high-impact lower corners of...
Read More
AU GET supplied by AU Buckets & Equipment

The Komatsu-style heel plate is designed to deliver extra wear protection to the high-impact lower corners of your bucket. Suited for heavy-duty applications, it helps extend the life of your ground-engaging tools by reducing wear at the heel—where buckets often fail first.

Product Specifications:
- Part Number: 426-70-12142
- Application: Heel Plate for Komatsu-style buckets
- Type: Weld-on or bolt-on (depending on setup)
- Material: High-strength steel tested to yield strength between 450–500
- Placement: Lower rear corner of bucket for abrasion resistance
Key Features:
- Protects critical heel zone from excessive wear
- Extends bucket life and reduces maintenance costs
- Built from wear-resistant steel for harsh operating conditions
- Compatible with AU Buckets and OEM bucket configurations
AU GET supplied by AU Buckets & Equipment – engineered to endure the toughest Australian job sites.
$245.00 Plus GST
SKU: 426-70-12142
Available: 16
Add to Quote
BSH-B501 – Right Hand Hitachi Sidecutter – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B501
Available: 12
Add to Quote
Sold as a Pair

BSH-B500 – Left Hand Hitachi Sidecutter (LH) – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B500
Available: 12
Add to Quote
208-70-34170 – Komatsu style PC400 Side Cutter LH
AU GET supplied by AU Buckets & Equipment This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection...
Read More
AU GET supplied by AU Buckets & Equipment

This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection against wear and impact. Built from high-strength alloy steel, it extends bucket life and improves penetration efficiency in abrasive or high-impact digging environments.

Product Specifications:
- Part Numbers: 208-70-34160 (LH) / 208-70-34170 (RH)
- Machine Fitment: Komatsu PC400
- Shape: Five-Hole Side Cutter
- Weight: 22.5 kg
- Hardness: 48–52 HRC
- Impact Value: >20 J
- Material: Heat-treated, abrasion-resistant alloy steel
Key Features:
- Five-bolt mounting for a strong, secure fit
- Protects the bucket side walls and improves overall cutting performance
- Suitable for heavy-duty applications including quarrying, trenching, and earthworks
- Compatible with OEM Komatsu buckets and AU Buckets edge systems
AU GET supplied by AU Buckets & Equipment – side protection you can trust for serious digging.
$210.00 Plus GST
SKU: 208-70-34170
Available: 3
Add to Quote
329-5955 Caterpillar Style Wing shroud Side Protector – 50mm Gap
AU GET Supplied by AU Buckets & Equipment The 329-5955 is a Caterpillar-style wing shroud / side protector, built to guard the sidewalls and cheeks...
Read More
AU GET Supplied by AU Buckets & Equipment The 329-5955 is a Caterpillar-style wing shroud / side protector, built to guard the sidewalls and cheeks of large buckets against heavy wear and impact. This model is designed to fit buckets with a 50mm gap and is secured using a 132-1008 pin and 132-0999 retainer, ensuring a reliable and easy-to-service locking system. Key Features: Suits 50mm side gap clearance Takes 132-1008 pin and 132-0999 retainer Weld-on or mechanically retained (depending on setup) Heavy-duty cast design for maximum wear protection Also referred to as: Goanna bar, cheek protector, vertical wear shroud Common Machine Fitment: CAT: 374D L, 374F L, 375 L 385B, 390D, 390D L 990H, 992K (Confirm dimensions before use on non-OEM buckets) Applications: Designed for mining, quarrying, and high-abrasion sites Protects bucket side plates from impact and structural damage Extends bucket service life and reduces rebuild downtime All AU GET parts are HARDENED to deliver reliable performance under tough Australian conditions. Stocked at our Welshpool WA warehouse. Ask us about bulk supply, side cutter kits, or full G.E.T. packages.
$200.00 Plus GST
Available: 4
Add to Quote
208-70-34160 – Komatsu style PC400 Side Cutter RH
AU GET supplied by AU Buckets & Equipment This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection...
Read More
AU GET supplied by AU Buckets & Equipment

This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection against wear and impact. Built from high-strength alloy steel, it extends bucket life and improves penetration efficiency in abrasive or high-impact digging environments.

Product Specifications:
- Part Numbers: 208-70-34160 (LH) / 208-70-34170 (RH)
- Machine Fitment: Komatsu PC400
- Shape: Five-Hole Side Cutter
- Weight: 22.5 kg
- Hardness: 48–52 HRC
- Impact Value: >20 J
- Material: Heat-treated, abrasion-resistant alloy steel
Key Features:
- Five-bolt mounting for a strong, secure fit
- Protects the bucket side walls and improves overall cutting performance
- Suitable for heavy-duty applications including quarrying, trenching, and earthworks
- Compatible with OEM Komatsu buckets and AU Buckets edge systems
AU GET supplied by AU Buckets & Equipment – side protection you can trust for serious digging.
$200.00 Plus GST
SKU: 208-70-34160
Available: 3
Add to Quote

Showing 1–36 of 63 resultsSorted by price: high to low

Shop

James Johnson

Jane Doe

John Smith

Quick Links

Contact Us

Subscribe to our newsletter