Shop

Showing 1–36 of 55 resultsSorted by price: high to low

For Hire
Simex PL100.25 Profiler, 1000mm Drum, suit bobcat/skidsteer
Simex PL 100.25 Hydraulic Profiler/Planer/Stabilizer 1000mm Drum Width Suit Bobcat/Skidsteer Standard Mount Plate Cutting Depth 220mm Weight 1720kg Required Flow Rate 120/190 L/m Case Drain...
Read More
- Simex PL 100.25 Hydraulic Profiler/Planer/Stabilizer
- 1000mm Drum Width
- Suit Bobcat/Skidsteer Standard Mount Plate
- Cutting Depth 220mm
- Weight 1720kg
- Required Flow Rate 120/190 L/m
- Case Drain Required
- In Cab Remote control via electrical harness
- 66 Teeth Fitted
$1,850.00 Plus GST
SKU: SB241202
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4Hire Hydrapower AC450 Profiler, 450mm drum, suit bobcat/skidsteer
Hydrapower AC450 Hydraulic Profiler/Planer/Stabilizer Suit bobcat/skidsteer Standard Mount Plate 450mm drum width Remote control/No Wires Rechargeable via solar panels Max flow 140Lpm/227 bar Has 55...
Read More
- Hydrapower AC450 Hydraulic Profiler/Planer/Stabilizer
- Suit bobcat/skidsteer Standard Mount Plate
- 450mm drum width
- Remote control/No Wires
- Rechargeable via solar panels
- Max flow 140Lpm/227 bar
- Has 55 Teeth in Total
- Weight 1100kg
$1,500.00 Plus GST
SKU: SB240604
Add to Quote This product has multiple variants. The options may be chosen on the product page
FOR HIRECurrently on Hire
4Hire CAT PC204 Profiler, 450mm Drum, suit bobcat/skidsteer
CAT PC204 Hydraulic Profiler/Planer/Stabilizer Suit bobcat/skidsteer Standard Mount Plate 450mm drum width Required flow rate 55/100L/m Weight 700kg
Read More
- CAT PC204 Hydraulic Profiler/Planer/Stabilizer
- Suit bobcat/skidsteer Standard Mount Plate
- 450mm drum width
- Required flow rate 55/100L/m
- Weight 700kg
$1,500.00 Plus GST
SKU: SG210503
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
FOR HIRE
4Hire Simex PL 60.25 Profiler, 600mm Drum, suit bobcat/skidsteer
Simex PL 60.25 Hydraulic Profiler/Planer/Stabilizer Suit Bobcat/Skidsteer Standard Mount Plate 600mm Drum Width Cutting Depth 220mm Weight 1200kg Required Flow Rate 110/170 L/m Case Drain...
Read More
- Simex PL 60.25 Hydraulic Profiler/Planer/Stabilizer
- Suit Bobcat/Skidsteer Standard Mount Plate
- 600mm Drum Width
- Cutting Depth 220mm
- Weight 1200kg
- Required Flow Rate 110/170 L/m
- Case Drain Required
- In Cab Remote control via electrical harness
- Has 46 Teeth in Total
$1,500.00 Plus GST
SKU: SB230101
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4Hire Simex PL4035 Profiler, 350mm Drum, suit bobcat/skidsteer
Simex PL 4035 Hydraulic Profiler/Planer/Stabilizer 350mm Drum Width Suit Bobcat/Skidsteer Standard Mount Plate *High Depth* Cutting Depth 100/300mm Weight 1200kg Required Flow Rate 110/170 L/m...
Read More
- Simex PL 4035 Hydraulic Profiler/Planer/Stabilizer
- 350mm Drum Width
- Suit Bobcat/Skidsteer Standard Mount Plate
- *High Depth* Cutting Depth 100/300mm
- Weight 1200kg
- Required Flow Rate 110/170 L/m
- Case Drain Required
- In Cab Remote control via electrical harness
- Teeth Fitted
$1,250.00 Plus GST
SKU: SB241203
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
195-78-71380 – Komatsu style D375 Ripper Nose (195-78-71380HX)
AU GET supplied by AU Buckets & Equipment Part #195-78-71380, also known as 195-78-71380HX, is a heavy-duty Komatsu-style ripper nose designed for D375 bulldozer ripper...
Read More
AU GET supplied by AU Buckets & Equipment

Part #195-78-71380, also known as 195-78-71380HX, is a heavy-duty Komatsu-style ripper nose designed for D375 bulldozer ripper shanks. This component serves as the core connection point for mounting ripper teeth, bushings, and pins—built to withstand the intense forces of deep ripping in quarrying, mining, and bulk earthworks.

Product Specifications:
- Part Number: 195-78-71380 / 195-78-71380HX
- Type: Ripper Nose / Tooth Holder
- Machine Compatibility: Komatsu D375 dozer
- Material: High-strength cast steel (HX = heavy-duty, extra hard)
- Mounting: Weld-on to ripper shank
- Compatible With: D375 series ripper teeth, pins, and retainers
Key Features:
- Precision-fit for Komatsu D375 rippers
- Reinforced heavy-duty (HX) variant for extreme wear resistance
- Weld-on nose provides a solid base for ripper point installation
- Designed to accept side-lock pin and bushing systems
AU GET supplied by AU Buckets & Equipment – built to anchor your toughest ripping gear.
$600.00 Plus GST
SKU: 195-78-71380
Available: 4
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Komatsu Motor Grader Scarifier Shank – 232-785-1291
$500.00 Plus GST
SKU: 232-785-1291
Out of stock
Add to Quote
9W8365 – CAT style D9 & D10 Ripper Guard suits 90mm Shank
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$500.00 Plus GST
SKU: 9W8365
Available: 8
Add to Quote
4T2236 – Grader Blade HT 8’x8x1 – 17x 3/4 holes
Caterpillar style 1"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4"(750X275) plow bolt and 17 of a...
Read More
Caterpillar style 1"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. The bolt hole spacing is 3"from the edge to the center of the 1st hole, and 3"from the center of the 1st hole to the center of the 2nd hole, and 6"from center of the 2^nd hole to the center of the 3^rd hole.
$320.00 Plus GST
SKU: 4T2236
Available: 10
Add to Quote
8E1848 – CAT style D8 & D9 Ripper Guard 80mm
AU GET supplied by AU Buckets & Equipment Part #8E1848 is a CAT style ripper shank guard designed to suit Caterpillar D8 and D9 dozers,...
Read More
AU GET supplied by AU Buckets & Equipment

Part #8E1848 is a CAT style ripper shank guard designed to suit Caterpillar D8 and D9 dozers, providing 80 mm wide wear protection to the ripper shank. Engineered for high-impact applications, this guard shields the shank from excessive wear during aggressive ripping in rock, frost, and hardpan.

Product Specifications:
- Part Number: 8E1848
- Machine Fitment: CAT D8, D9
- Component Type: Ripper Guard / Shank Protector
- Width: 80 mm
- Application: Rock ripping, quarry work, mining, heavy construction
- Material: Abrasion-resistant, heat-treated alloy steel
- Mounting: Weld-on or mechanical fit (based on shank style)
Key Features:
- Protects ripper shank from premature wear and damage
- Extends the service life of your ripping equipment
- Compatible with OEM Caterpillar D8/D9 rippers and AU Buckets shanks
- Built tough for demanding, high-impact excavation conditions
AU GET supplied by AU Buckets & Equipment – protect your ripper, power through the job.
$300.00 Plus GST
SKU: 8E1848
Available: 1
Add to Quote
7D1577 – Grader Blade HT 7’x8x3/4 – 15x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is built for high-performance grading in construction, road maintenance, and earthmoving applications....
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is built for high-performance grading in construction, road maintenance, and earthmoving applications. With a profile of 3/4" thick, 8" wide, and 7 feet long, this blade is heat treated for maximum wear resistance and features a 15-hole bolt pattern for secure mounting.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long
- Hole Count: 15
- Mounting Requirements:
  
  (15) Plow Bolts – 3/4" x 2 3/4" (750 x 275 mm)
  
  (15) Hex Nuts – 3/4" (750 HEX)
- Hole Pattern: Standard Caterpillar spacing
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved design for smooth grading and efficient material movement
- Heat treated for enhanced strength and wear resistance
- 15-hole bolt-on configuration for secure fit and reduced vibration
- Compatible with Caterpillar graders and AU Buckets blade systems
AU GET supplied by AU Buckets & Equipment – designed tough for Australian grading conditions.
$260.00 Plus GST
SKU: 7D1577
Available: 4
Add to Quote
5D9559 – Grader Blade HT 7’x8x3/4 – 15x 5/8 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8"...
Read More
- AU GET supplied by AU Buckets & Equipment
  
  This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8" wide, and 7 feet long, this blade features a 15-hole standard mounting pattern and is heat treated for maximum durability. Designed to deliver long wear life, clean cutting, and reliable performance in abrasive environments.
  
  Product Specifications:
  
  Blade Style: Curved, Heat Treated
  
  Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long
  
  Hole Count: 15
  
  Mounting Requirements:
  
  (15) Plow Bolts – 5/8" x 2 3/4" (625 x 275 mm)
  
  (15) Hex Nuts – 5/8" (625 HEX)
  
  Hole Pattern: Standard Caterpillar spacing
  
  Material: Heat treated alloy steel
  
  Hardness: Tested to yield strength between 450–500
  
  Key Features:
  
  Curved profile for efficient cutting and grading
  
  Heat treated for enhanced strength and wear resistance
  
  15-hole design for secure, stable mounting
  
  Ideal for Caterpillar graders and compatible with AU Buckets blade systems
  
  AU GET supplied by AU Buckets & Equipment – engineered tough for Australian grading conditions.
$260.00 Plus GST
SKU: 5D9559
Available: 10
Add to Quote
4T5502-F – FORGED STEEL CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$250.00 Plus GST
SKU: 4T5502-F
Out of stock
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 8
Add to Quote
4T5501 – CAT style R500 / D10 Ripper Penetration Short
AU GET supplied by AU Buckets & Equipment Part #4T5501 is a CAT style R500 series ripper penetration short tooth, built for extreme ground conditions...
Read More
AU GET supplied by AU Buckets & Equipment

Part #4T5501 is a CAT style R500 series ripper penetration short tooth, built for extreme ground conditions where maximum force and breakout power are essential. With a reinforced design and short profile, it is perfect for aggressive ripping in quarrying, mining, and heavy earthmoving.

Product Specifications:
- Part Number: 4T5501
- Series: CAT R500
- Tooth Type: Ripper Penetration – Short
- Bolt Diameter: 0.75"
- Thickness: 8.604"
- Width: 6.156"
- Length: 15"
- Material: High-strength, heat-treated alloy steel
Key Features:
- Short, heavy-duty design for maximum ground penetration
- Engineered to withstand high-impact and abrasive conditions
- Fits standard CAT R500 ripper setups
- Fully compatible with OEM CAT and AU Buckets R500 series systems
AU GET supplied by AU Buckets & Equipment – built for deep ripping power when you need it most.
$240.00 Plus GST
SKU: 4T5501
Available: 2
Add to Quote
4T4502 – CAT style D10 Ripper Centreline
AU GET supplied by AU Buckets & Equipment This Caterpillar-style ripper bucket tooth is designed for the D10 dozer ripper groups and R500 series attachments,...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style ripper bucket tooth is designed for the D10 dozer ripper groups and R500 series attachments, delivering maximum penetration and durability in the most extreme ripping and excavation environments. Ideal for heavy quarrying, mining, and bulk earthmoving, it’s built to withstand high-impact forces and abrasive wear.

Product Specifications:
- Machine Fitment: Caterpillar D10 / R500 series
- Tooth Type: Ripper Bucket Tooth
- Application: Heavy ripping, rock excavation, mining
- Material: Heat-treated, high-strength alloy steel
- Mounting System:
  
  Pin: 6Y3909
  
  Retainer: 4T4707 (sleeved style)
Key Features:
- Aggressive ripper tooth profile for maximum ground penetration
- Built to perform in extreme-impact and high-abrasion conditions
- Secure mounting with 6Y3909 pin and 4T4707 retainer system
- Compatible with OEM CAT D10 rippers and AU Buckets R500 series assemblies
AU GET supplied by AU Buckets & Equipment – engineered to rip deep and last longer.
$230.00 Plus GST
SKU: 4T4502
Available: 12
Add to Quote
4T4501 – CAT style D10/D11/R500 Ripper Centreline Short
AU GET supplied by AU Buckets & Equipment Part #4T4501 is a CAT style R500 centerline short tooth, designed for heavy-duty ripping and penetration applications....
Read More
AU GET supplied by AU Buckets & Equipment

Part #4T4501 is a CAT style R500 centerline short tooth, designed for heavy-duty ripping and penetration applications. Built for maximum strength and direct ground engagement, it’s ideal for dozers, large excavators, and ripping equipment operating in the harshest conditions.

Product Specifications:
- Part Number: 4T4501
- Series: CAT R500
- Tooth Type: Centerline Short Tooth
- Bolt Diameter: 0" (bolt system not applicable – typically pinned)
- Thickness: 8.624"
- Width: 6.169"
- Length: 14.76"
- Material: Heat-treated, high-strength alloy steel
Key Features:
- Short, reinforced design for concentrated force and breakout power
- Engineered for high-impact and abrasive digging conditions
- Suits large equipment using the R500 series ripper group
- Fully compatible with OEM CAT R500 setups and AU Buckets GET systems
AU GET supplied by AU Buckets & Equipment – built to tear through the toughest terrain.
$230.00 Plus GST
SKU: 4T4501
Available: 3
Add to Quote
7D1576 – Grader Blade HT 6’x8x3/4 – 13x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is engineered for tough grading and roadwork applications. With a size of...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is engineered for tough grading and roadwork applications. With a size of 3/4" thick, 8" wide, and 6 feet long, this blade is heat treated for enhanced wear resistance and features a 13-hole mounting pattern for secure installation. It’s designed for smooth cutting performance and long service life.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 72" (1828.8 mm) long
- Hole Count: 13
- Mounting Requirements:
  
  (13) Plow Bolts – 3/4" x 2 1/4" (750 x 225 mm)
  
  (13) Hex Nuts – 3/4" (750 HEX)
- Hole Spacing:
  
  3" (76.2 mm) from edge to center of 1st hole
  
  3" (76.2 mm) from center of 1st to 2nd hole
  
  6" (152.4 mm) from center of 2nd to 3rd hole
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Heat treated for durability in abrasive conditions
- Curved edge for smooth grading and material flow
- Accurate bolt spacing ensures strong, vibration-resistant fit
- Compatible with Caterpillar graders and AU Buckets systems
AU GET supplied by AU Buckets & Equipment – engineered tough for Australian terrain.
$230.00 Plus GST
SKU: 7D1576
Available: 17
Add to Quote
7D1158 – Grader Blade HT 7’x8x5/8 – 15x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is designed for high-performance grading across construction, roadwork, and maintenance applications. With...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is designed for high-performance grading across construction, roadwork, and maintenance applications. With a profile of 5/8" thick, 8" wide, and 7 feet long, this blade features a 15-hole configuration and is heat treated to deliver consistent wear life and cutting performance in abrasive conditions.

Product Specifications:

Blade Style: Curved, Heat Treated

Dimensions: 5/8" (15.88 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long

Hole Count: 15

Mounting Requirements:

(15) Plow Bolts – 3/4" x 2 3/4" (750 x 275 mm)

(15) Hex Nuts – 3/4" (750 HEX)

Hole Pattern: Standard Caterpillar spacing

Material: Heat treated alloy steel

Hardness: Tested to yield strength between 450–500

Key Features:

Curved edge profile for efficient cutting and material flow

Heat treated for improved toughness and extended life

15-hole bolt-on design ensures secure fit and easy replacement

Ideal for Caterpillar graders and fully compatible with AU Buckets blade systems

AU GET supplied by AU Buckets & Equipment – built for reliability on rugged Australian job sites.
$230.00 Plus GST
SKU: 7D1158
Available: 20
Add to Quote
4T5502 – CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$230.00 Plus GST
SKU: 4T5502
Available: 13
Add to Quote
5D9558 – Grader Blade HT 6’x8x3/4 – 13x 5/8 holes
Caterpillar-Style Grader Blade: Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm) Curved and heat-treated for enhanced durability 13-hole configuration Fastener Requirements:...
Read More
- Caterpillar-Style Grader Blade:
  
  Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm)
  
  Curved and heat-treated for enhanced durability
  
  13-hole configuration
- Fastener Requirements:
  
  13 plow bolts: 5/8" x 2 3/4" (15.875 mm x 69.85 mm)
  
  13 hex nuts: 5/8" (15.875 mm)
- OEM Part Number: 5D-9558
- Design Features:
  
  Engineered for heavy-duty grading applications
  
  Universal, used with various brand graders.
  
  Heat-treated for increased strength and wear resistance
$230.00 Plus GST
SKU: 5D9558
Available: 20
Add to Quote
7D1949 – Grader Blade HT 8’x8x3/4 – 17x 3/4 holes
Caterpillar style 3/4"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4" plow bolt and 17 of a...
Read More
Caterpillar style 3/4"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4" plow bolt and 17 of a 3/4" hex nut. The bolt hole spacing is 3"from the edge to the center of the 1st hole, and 3"from the center of the 1st hole to the center of the 2nd hole, and 6"from center of the 2^nd hole to the center of the 3^rd hole.
$220.00 Plus GST
SKU: 7D1949
Available: 23
Add to Quote
195-78-71320 Ripper Tooth Point Fit For Komatsu Motor Grader
$210.00 Plus GST
SKU: 195-78-71320
Available: 11
Add to Quote
5D9557 – Grader Blade HT 7’x6x3/4 – 15x 5/8 holes
Caterpillar-Style Curved Grader Blade – 3/4" x 6" x 7' (15 Hole, Heat Treated)AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader...
Read More
Caterpillar-Style Curved Grader Blade – 3/4" x 6" x 7' (15 Hole, Heat Treated)
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade measures 3/4" thick, 6" wide, and 7 feet long, making it ideal for general grading, roadwork, and earthmoving applications. Heat treated for increased wear resistance, it features 15 evenly spaced holes and is designed to bolt directly to most standard grader moldboards.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 6" (152.4 mm) wide x 84" (2133.6 mm) long
- Hole Count: 15
- Mounting Requirements:
  
  (15) Plow Bolts – 5/8" x 2 3/4" (625 x 275 mm)
  
  (15) Hex Nuts – 5/8" (625 HEX)
- Hole Pattern: Standard Caterpillar spacing
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved profile for smooth cutting and rolling action
- Heat treated for improved durability and impact resistance
- 15-hole configuration for secure mounting and reduced vibration
- Compatible with Caterpillar graders and AU Buckets blade systems
AU GET supplied by AU Buckets & Equipment – built for performance in demanding Australian grading conditions.
$200.00 Plus GST
SKU: 5D9557
Available: 10
Add to Quote
9J6586 – CAT style D4 Straight Ripper Shank
AU GET supplied by AU Buckets & Equipment Part #9J6586 is a CAT style straight ripper shank designed specifically for the Caterpillar D4 dozer. Built...
Read More
AU GET supplied by AU Buckets & Equipment

Part #9J6586 is a CAT style straight ripper shank designed specifically for the Caterpillar D4 dozer. Built for light to moderate ripping applications, it delivers consistent performance in compacted soils, clay, and light rock. Its straight profile provides excellent penetration and control during surface preparation and trenching.

Product Specifications:
- Part Number: 9J6586
- Machine Fitment: CAT D4 Dozer
- Component Type: Straight Ripper Shank
- Application: Light ripping, surface prep, trenching, compacted soil
- Material: Heat-treated, high-tensile alloy steel
- Compatible Tips: J200 or D4-series ripper tips (e.g., 6Y5230, 8E7300 nose + tooth assemblies)
Key Features:
- Straight shank profile for controlled ripping in moderate ground
- Built for durability and impact resistance
- Fully compatible with CAT OEM rippers and AU Buckets tip systems
- Ideal for contractors and earthmovers working in construction and utility environments
AU GET supplied by AU Buckets & Equipment – rip clean, rip confident.
$180.00 Plus GST
SKU: 9J6586
Available: 18
Add to Quote
5D9556 – Grader Blade HT 6’x6x3/4 – 13x 5/8 holes
Built to tackle tough grading jobs, this Caterpillar style curved grader blade is heat treated for increased strength and wear resistance. Ideal for use on...
Read More
Built to tackle tough grading jobs, this Caterpillar style curved grader blade is heat treated for increased strength and wear resistance. Ideal for use on graders and other compatible machines, this blade delivers efficient material movement and long-lasting performance in abrasive conditions.

Specifications:
- Dimensions: 5/8" thick x 6" wide x 7' (84") long
- Style: Curved, heat treated
- Bolt Holes: 15 evenly spaced
- Bolt Hole Size: 5/8"
- Bolt Hole Spacing: Standard grader configuration
- Bolt Type: Requires 15 plow bolts (5/8" x 2 3/4", 625X275)
- Nut Type: Requires 15 hex nuts (5/8", 625 HEX NUT)
Key Features:
- Curved edge design enhances cutting and rolling action for superior grading performance
- Heat treated for extended wear life and durability
- 15-hole configuration ensures secure mounting
- Designed for use with Caterpillar and compatible grader machines
- Easy bolt-on installation with industry-standard hardware
$180.00 Plus GST
SKU: 5D9556
Available: 18
Add to Quote
SOLD OUT _ More Stock Arriving Soon
5D9562 – Grader Blade HT 6’x8x5/8 – 13x 5/8″ holes
Grader Blade Dimensions: Thickness: 15.88 mm (0.625 inches) Width: 203.2 mm (8 inches) Length: 1,828.8 mm (6 feet or 72 inches) Bolt Specifications: Bolt Size:...
Read More
Grader Blade Dimensions:
- Thickness: 15.88 mm (0.625 inches)
- Width: 203.2 mm (8 inches)
- Length: 1,828.8 mm (6 feet or 72 inches)
Bolt Specifications:
- Bolt Size: 15.88 mm × 57.15 mm (5/8" × 2 1/4")
- Hex Nut Size: 15.88 mm (5/8" HEX NUT)
Bolt Hole Spacing:
- From the edge to the center of the 1st hole: 76.2 mm (3 inches)
- From the center of the 1st hole to the center of the 2nd hole: 76.2 mm (3 inches)
- From the center of the 2nd hole to the center of the 3rd hole: 152.4 mm (6 inches)
Bolt Diameter: 0.75
Blade Type: Grader Blade
Hole 1 Distance End to 1st Hole: 3
Hole 1 Distance 1st to 2nd Hole: 3
Machine Type: GRADER
Hole 1 Distance 2nd to 3rd Hole: 6
Length: 96
$180.00 Plus GST
SKU: 5D9562
Out of stock
Add to Quote
5D9554 – Grader Blade HT 7’x6x5/8 – 15x 5/8 holes
The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is...
Read More
- The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is designed to suit various Caterpillar buckets, including 72" and 78" skid steer models.
  
  Specifications:
  
  Part Number: 5D9554
  
  Length: 80.579"
  
  Width: 6.5"
  
  Thickness: 0.625" (5/8")
  
  Bolt Hole Count: 11
  
  Bolt Hole Spacing: 4.65" center-to-center
  
  Edge to First Hole Distance: 2.96"
  
  Bolt Type: 5/8" x 2" (625X200) plow bolts
  
  Nut Type: 5/8" (625 HEX NUT) hex nuts
  
  Bevel: Double beveled
  
  Reversible: Yes
  
  Key Features:
  
  Manufactured from high-strength steel for extended wear life
  
  Double beveled edge offers smooth digging and back grading
  
  Reversible design doubles the usable lifespan
  
  Easy bolt-on installation with standard hardware
  
  Commonly used on Caterpillar skid steer loader buckets
$180.00 Plus GST
SKU: 5D9554
Out of stock
Add to Quote
SOLD OUT _ More Stock Arriving Soon
5D9553 – Grader Blade HT 6’x6x5/8 – 13x 5/8″ holes
Grader Blade Dimensions: Thickness: 15.88 mm (5/8 inch) Width: 152.4 mm (6 inches) Length: 1,828.8 mm (6 feet or 72 inches) Bolt Specifications: Plow Bolt...
Read More
Grader Blade Dimensions:
- Thickness: 15.88 mm (5/8 inch)
- Width: 152.4 mm (6 inches)
- Length: 1,828.8 mm (6 feet or 72 inches)
Bolt Specifications:
- Plow Bolt Size: 15.88 mm × 69.85 mm (5/8" × 2 3/4")
- Hex Nut Size: 15.88 mm (5/8" HEX NUT)
- Bolt Size: 15.88 mm × 57.15 mm (5/8" × 2 1/4")
- Hex Nut Size: 15.88 mm (5/8" HEX NUT)
Bolt Hole Spacing:
- From the edge to the center of the 1st hole: 76.2 mm (3 inches)
- From the center of the 1st hole to the center of the 2nd hole: 76.2 mm (3 inches)
- From the center of the 2nd hole to the center of the 3rd hole: 152.4 mm (6 inches)
Bolt Diameter: 0.75
Blade Type: Grader Blade
Hole 1 Distance End to 1st Hole: 3
Hole 1 Distance 1st to 2nd Hole: 3
Machine Type: GRADER
Hole 1 Distance 2nd to 3rd Hole: 6
Length: 96
$165.00 Plus GST
SKU: 5D9553
Out of stock
Add to Quote
9J3658 – Grader Blade HT 7’x6x5/8 – 15x 3/4 holes
This Caterpillar-style curved grader blade is built for high-performance grading in roadwork and earthmoving operations. With dimensions of 5/8" thick, 6" wide, and 7 feet...
Read More
This Caterpillar-style curved grader blade is built for high-performance grading in roadwork and earthmoving operations. With dimensions of 5/8" thick, 6" wide, and 7 feet long, this blade is heat treated to increase wear life and features a 15-hole bolt pattern for secure and stable mounting.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 5/8" (15.88 mm) thick x 6" (152.4 mm) wide x 84" (2133.6 mm) long
- Hole Count: 15
- Mounting Requirements:
  
  (15) Plow Bolts – 3/4" x 2 3/4" (750 x 275 mm)
  
  (15) Hex Nuts – 3/4" (750 HEX)
- Bolt Hole Spacing:
  
  3" (76.2 mm) from edge to center of the 1st hole
  
  3" (76.2 mm) from center of 1st to 2nd hole
  
  6" (152.4 mm) from center of 2nd to 3rd hole
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved edge design ensures efficient cutting and material movement
- Heat treated for superior resistance to abrasion and impact
- Precision bolt spacing for reliable, vibration-free mounting
- Fully compatible with Caterpillar graders and AU Buckets systems
AU GET supplied by AU Buckets & Equipment – engineered tough for Australian site conditions.
$160.00 Plus GST
SKU: 9J3658
Available: 10
Add to Quote
175-78-31230-F – Komatsu-Style Forged Ripper Bucket Tooth
$150.00 Plus GST
SKU: 175-78-31230-F
Available: 8
Add to Quote
8E7350 – Weld On Ripper Nose R350 / D6 / D7
The 8E7350 is a weld-on ripper shank repair nose adapter designed for Caterpillar R350 / D6 / D7 rippers. It is used to restore worn...
Read More
The 8E7350 is a weld-on ripper shank repair nose adapter designed for Caterpillar R350 / D6 / D7 rippers. It is used to restore worn ripper shanks or bucket lip shanks, allowing continued use of R350 teeth without replacing the entire shank. Built from high-strength alloy steel, this repair nose is engineered to handle the shock and abrasion of ripping in quarries, hard clay, and rocky ground.
$150.00 Plus GST
SKU: 8E7350
Available: 1
Add to Quote
9U9694 – CAT style D9 Ripper Nose 2 Hole
AU GET supplied by AU Buckets & Equipment Part #9U9694 is a CAT style ripper nose designed to suit Caterpillar D9 dozers. Featuring a 2-hole...
Read More
AU GET supplied by AU Buckets & Equipment

Part #9U9694 is a CAT style ripper nose designed to suit Caterpillar D9 dozers. Featuring a 2-hole mounting system, this heavy-duty nose securely holds R450 or R500 series ripper tips for extreme ripping applications in rock, hardpan, and compacted material. It’s built to withstand high breakout forces while maintaining precise tip alignment.

Product Specifications:
- Part Number: 9U9694
- Machine Fitment: CAT D9 Dozer
- Component Type: Ripper Nose (2-Hole)
- Tooth Compatibility: R450 / R500 Series tips (e.g., 4T5501, 4T5502)
- Mounting Style: 2-hole mechanical fit
- Material: High-strength, heat-treated cast alloy steel
- Application: Rock ripping, quarry work, mining, heavy civil
Key Features:
- Precision 2-bolt mounting for secure, vibration-resistant installation
- Designed for use with CAT D9 ripper shanks
- Compatible with OEM and AU Buckets ripper teeth and components
- Built to deliver maximum performance and longevity in extreme conditions
AU GET supplied by AU Buckets & Equipment – lock in your tooth, unleash your ripper.
$150.00 Plus GST
SKU: 9U9694
Available: 2
Add to Quote
9J3657 – Grader Blade HT 6’x6x5/8 – 13x 3/4 holes
This Caterpillar-style curved grader blade is designed for efficient grading and long-lasting wear resistance in road construction and earthmoving applications. Measuring 5/8" thick, 6" wide,...
Read More
This Caterpillar-style curved grader blade is designed for efficient grading and long-lasting wear resistance in road construction and earthmoving applications. Measuring 5/8" thick, 6" wide, and 6 feet long, this blade is heat treated and features a 13-hole bolt pattern for secure mounting and dependable performance.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 0.625" (15.88 mm) thick x 6" (152.4 mm) wide x 72" (1828.8 mm) long
- Hole Count: 13
- Mounting Requirements:
  
  (13) Plow Bolts – 3/4" x 2 1/4" (750 x 225 mm)
  
  (13) Hex Nuts – 3/4" (750 HEX)
- Bolt Hole Spacing:
  
  3" (76.2 mm) from edge to center of the 1st hole
  
  3" (76.2 mm) from center of 1st to 2nd hole
  
  6" (152.4 mm) from center of 2nd to 3rd hole
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved profile improves cutting efficiency and material flow
- Heat treated for extended service life in abrasive conditions
- Precise bolt spacing for secure, vibration-resistant mounting
- Compatible with Caterpillar graders and AU Buckets systems
AU GET supplied by AU Buckets & Equipment – built tough for Australian grading conditions.
$150.00 Plus GST
SKU: 9J3657
Available: 8
Add to Quote
9W2452 – CAT style D8 & D9 Ripper Centreline Intermediate
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
Read More
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
$150.00 Plus GST
SKU: 9W2452
Available: 5
Add to Quote
V51VY – ESC0-Style V-Series Single Tiger Tooth
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
Read More
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
$150.00 Plus GST
SKU: V51VY
Available: 5
Add to Quote