Shop

Showing 1–36 of 57 resultsSorted by price: high to low

Lombardini 8.5KVA Generator – 240V
Lombardini 8.5KVA Generator - 240V Lockable Isolators E-Stop Recently Serviced Quarterly Tested and Tagged Brand New Control Module Installed Brand New Battery Installed Mounted in...
Read More
- Lombardini 8.5KVA Generator - 240V
- Lockable Isolators
- E-Stop
- Recently Serviced
- Quarterly Tested and Tagged
- Brand New Control Module Installed
- Brand New Battery Installed
- Mounted in Box Frame
- Standby Kva: 8.5 (36.9A)
- hours showing zero , but has 2250
- Prime Kva: 7.7
- Engine Brand: Lombardini
- Fuel Tank: 26L
- Outlets: 1 x Single Phase , 2 x 15amp, 1 x 32amp outlet
$4,500.00 Plus GST
SKU: GE50
Available: 1
Add to Quote
ES6697-7 – ESC0 style Heel Shroud (>500 Tonne)
AU GET supplied by AU Buckets & Equipment The ES6697-7 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside...
Read More
AU GET supplied by AU Buckets & Equipment

The ES6697-7 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside corners of excavator and loader buckets. Ideal for extreme abrasion environments, this heavy-duty shroud adds an extra layer of defense where buckets wear fastest – improving bucket life and performance in tough digging, quarrying, and mining conditions.

Product Specifications:
- Part Number: ES6697-7
- Style: ESC0 Heel Shroud
- Mounting: Weld-on
- Position: Outer bucket heel (left/right interchangeable)
- Material: High-strength, wear-resistant alloy steel
- Common Use: Excavators & loaders in abrasive or high-impact environments
Key Features:
- Reinforces bucket corners to reduce structural wear
- Helps prevent cracking and distortion of bucket sides
- Heavy-duty construction for abrasive and impact-resistant protection
- Suits a range of large-size buckets
- Easy weld-on installation
AU GET supplied by AU Buckets & Equipment – Built to protect your investment, dig after dig.
$900.00 Plus GST
SKU: ES6697-7
Available: 20
Add to Quote
ES6553 – ESC0 Style Wing Shroud / Side Protector (90mm Gap)
AU GET Supplied by AU Buckets & Equipment The ES6553 is a heavy-duty ESC0-style wing shroud, designed to protect the side walls and lower cheek...
Read More
AU GET Supplied by AU Buckets & Equipment The ES6553 is a heavy-duty ESC0-style wing shroud, designed to protect the side walls and lower cheek areas of excavator and loader buckets. With a 90mm internal gap, this weld-on shroud offers reliable protection against abrasive wear and impact in harsh working conditions. Key Features: ESC0-style wing shroud / cheek protector Suits 90mm bucket side wall gap High-strength alloy casting with abrasion-resistant profile Weld-on mounting face for permanent installation Designed to reduce bucket corner scalloping and extend service life Applications: Ideal for buckets used in mining, quarrying, and high-wear civil environments Fits large excavators and wheel loaders with compatible edge systems Often installed in conjunction with heel blocks and lip shrouds
$800.00 Plus GST
SKU: ES6553
Available: 1
Add to Quote
9W8365 – CAT style D9 & D10 Ripper Guard suits 90mm Shank
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$500.00 Plus GST
SKU: 9W8365
Available: 8
Add to Quote
ES6697-5 – ESC0 style Heel Shroud (180-400 Tonne)
AU GET supplied by AU Buckets & Equipment The ES6697-5 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside...
Read More
AU GET supplied by AU Buckets & Equipment

The ES6697-5 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside corners of excavator and loader buckets. Ideal for extreme abrasion environments, this heavy-duty shroud adds an extra layer of defense where buckets wear fastest – improving bucket life and performance in tough digging, quarrying, and mining conditions.

Product Specifications:
- Part Number: ES6697-5
- Style: ESC0 Heel Shroud
- Mounting: Weld-on
- Position: Outer bucket heel (left/right interchangeable)
- Material: High-strength, wear-resistant alloy steel
- Common Use: Excavators & loaders in abrasive or high-impact environments
Key Features:
- Reinforces bucket corners to reduce structural wear
- Helps prevent cracking and distortion of bucket sides
- Heavy-duty construction for abrasive and impact-resistant protection
- Suits a range of mid- to large-size buckets
- Easy weld-on installation
AU GET supplied by AU Buckets & Equipment – Built to protect your investment, dig after dig.
$350.00 Plus GST
SKU: ES6697-5
Available: 20
Add to Quote
4T2236 – Grader Blade HT 8’x8x1 – 17x 3/4 holes
Caterpillar style 1"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4"(750X275) plow bolt and 17 of a...
Read More
Caterpillar style 1"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. The bolt hole spacing is 3"from the edge to the center of the 1st hole, and 3"from the center of the 1st hole to the center of the 2nd hole, and 6"from center of the 2^nd hole to the center of the 3^rd hole.
$320.00 Plus GST
SKU: 4T2236
Available: 10
Add to Quote
ES6697-9 – ESC0 style Heel Shroud (80-180 Tonne)
AU GET supplied by AU Buckets & Equipment This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from...
Read More
AU GET supplied by AU Buckets & Equipment

This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from abrasion and impact. Made from high-strength alloy steel, it enhances bucket longevity and reduces the risk of edge failure in demanding conditions.

Product Specifications:
- Weight: 22 kg
- Recommended Excavator Size: 30–100 tonne
- Bottom Pad Thickness: 50 mm
- Bottom Pad Depth: 250 mm
- Width: 188 mm
- Height: 150 mm
- Original Manufacturer Reference: ESCO
- Machine Type: Excavator / Loader
- Common Names: Wear Shoe, Corner Wear Shoe, Bucket Protector, L Shape Protector
Key Features:
- Designed to reinforce and protect high-wear corners of machinery buckets
- Suitable for a wide range of bucket sizes and machine types
- Fabricated from abrasion-resistant alloy steel for extended wear life
- Easy to weld on for fast field installation or rebuilds
AU GET supplied by AU Buckets & Equipment – protecting your edge, preserving your power.
$300.00 Plus GST
SKU: ES6697-9
Available: 10
Add to Quote
7D1577 – Grader Blade HT 7’x8x3/4 – 15x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is built for high-performance grading in construction, road maintenance, and earthmoving applications....
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is built for high-performance grading in construction, road maintenance, and earthmoving applications. With a profile of 3/4" thick, 8" wide, and 7 feet long, this blade is heat treated for maximum wear resistance and features a 15-hole bolt pattern for secure mounting.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long
- Hole Count: 15
- Mounting Requirements:
  
  (15) Plow Bolts – 3/4" x 2 3/4" (750 x 275 mm)
  
  (15) Hex Nuts – 3/4" (750 HEX)
- Hole Pattern: Standard Caterpillar spacing
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved design for smooth grading and efficient material movement
- Heat treated for enhanced strength and wear resistance
- 15-hole bolt-on configuration for secure fit and reduced vibration
- Compatible with Caterpillar graders and AU Buckets blade systems
AU GET supplied by AU Buckets & Equipment – designed tough for Australian grading conditions.
$260.00 Plus GST
SKU: 7D1577
Available: 4
Add to Quote
5D9559 – Grader Blade HT 7’x8x3/4 – 15x 5/8 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8"...
Read More
- AU GET supplied by AU Buckets & Equipment
  
  This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8" wide, and 7 feet long, this blade features a 15-hole standard mounting pattern and is heat treated for maximum durability. Designed to deliver long wear life, clean cutting, and reliable performance in abrasive environments.
  
  Product Specifications:
  
  Blade Style: Curved, Heat Treated
  
  Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long
  
  Hole Count: 15
  
  Mounting Requirements:
  
  (15) Plow Bolts – 5/8" x 2 3/4" (625 x 275 mm)
  
  (15) Hex Nuts – 5/8" (625 HEX)
  
  Hole Pattern: Standard Caterpillar spacing
  
  Material: Heat treated alloy steel
  
  Hardness: Tested to yield strength between 450–500
  
  Key Features:
  
  Curved profile for efficient cutting and grading
  
  Heat treated for enhanced strength and wear resistance
  
  15-hole design for secure, stable mounting
  
  Ideal for Caterpillar graders and compatible with AU Buckets blade systems
  
  AU GET supplied by AU Buckets & Equipment – engineered tough for Australian grading conditions.
$260.00 Plus GST
SKU: 5D9559
Available: 10
Add to Quote
329-5955 Caterpillar Style Wing shroud Side Protector – 50mm Gap
AU GET Supplied by AU Buckets & Equipment The 329-5955 is a Caterpillar-style wing shroud / side protector, built to guard the sidewalls and cheeks...
Read More
AU GET Supplied by AU Buckets & Equipment The 329-5955 is a Caterpillar-style wing shroud / side protector, built to guard the sidewalls and cheeks of large buckets against heavy wear and impact. This model is designed to fit buckets with a 50mm gap and is secured using a 132-1008 pin and 132-0999 retainer, ensuring a reliable and easy-to-service locking system. Key Features: Suits 50mm side gap clearance Takes 132-1008 pin and 132-0999 retainer Weld-on or mechanically retained (depending on setup) Heavy-duty cast design for maximum wear protection Also referred to as: Goanna bar, cheek protector, vertical wear shroud Common Machine Fitment: CAT: 374D L, 374F L, 375 L 385B, 390D, 390D L 990H, 992K (Confirm dimensions before use on non-OEM buckets) Applications: Designed for mining, quarrying, and high-abrasion sites Protects bucket side plates from impact and structural damage Extends bucket service life and reduces rebuild downtime All AU GET parts are HARDENED to deliver reliable performance under tough Australian conditions. Stocked at our Welshpool WA warehouse. Ask us about bulk supply, side cutter kits, or full G.E.T. packages.
$250.00 Plus GST
Available: 4
Add to Quote
ES5280 – ESC0 style Wing Shroud suits 40mm Cheek
AU GET supplied by AU Buckets & Equipment Part #ES5280 is an ESC0-style wing shroud designed to fit 40 mm thick bucket cheek plates, providing...
Read More
AU GET supplied by AU Buckets & Equipment

Part #ES5280 is an ESC0-style wing shroud designed to fit 40 mm thick bucket cheek plates, providing critical sidewall protection during high-impact loading, trenching, and quarry work. It extends bucket life by shielding high-wear areas against abrasion, impact, and ground contact.

Product Specifications:
- Part Number: ES5280
- Style: ESC0 Wing Shroud
- Cheek Plate Fitment: 40 mm
- Application: Sidewall protection for excavator and loader buckets
- Mounting: Weld-on
- Material: High-strength, wear-resistant alloy steel
Key Features:
- Wrap-around design guards cheek plates from excessive wear and damage
- Ideal for use in abrasive and high-impact environments
- Quick and secure weld-on installation
- Compatible with AU Buckets and OEM ESC0 protection systems
AU GET supplied by AU Buckets & Equipment – shield your sides, extend your bucket’s life.
$250.00 Plus GST
SKU: ES5280
Available: 17
Add to Quote
Sold as a Pair

096-4747/4748 – Caterpillar Sidecutters-4 BOLT (AU20TSIDECUTTRENCH)
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
Read More
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
$250.00 Plus GST
SKU: AU20TSIDECUTTRENCH
Available: 6
Add to Quote
Komatsu Heel Plate – 426-70-12142
AU GET supplied by AU Buckets & Equipment The Komatsu-style heel plate is designed to deliver extra wear protection to the high-impact lower corners of...
Read More
AU GET supplied by AU Buckets & Equipment

The Komatsu-style heel plate is designed to deliver extra wear protection to the high-impact lower corners of your bucket. Suited for heavy-duty applications, it helps extend the life of your ground-engaging tools by reducing wear at the heel—where buckets often fail first.

Product Specifications:
- Part Number: 426-70-12142
- Application: Heel Plate for Komatsu-style buckets
- Type: Weld-on or bolt-on (depending on setup)
- Material: High-strength steel tested to yield strength between 450–500
- Placement: Lower rear corner of bucket for abrasion resistance
Key Features:
- Protects critical heel zone from excessive wear
- Extends bucket life and reduces maintenance costs
- Built from wear-resistant steel for harsh operating conditions
- Compatible with AU Buckets and OEM bucket configurations
AU GET supplied by AU Buckets & Equipment – engineered to endure the toughest Australian job sites.
$245.00 Plus GST
SKU: 426-70-12142
Available: 16
Add to Quote
7D1576 – Grader Blade HT 6’x8x3/4 – 13x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is engineered for tough grading and roadwork applications. With a size of...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is engineered for tough grading and roadwork applications. With a size of 3/4" thick, 8" wide, and 6 feet long, this blade is heat treated for enhanced wear resistance and features a 13-hole mounting pattern for secure installation. It’s designed for smooth cutting performance and long service life.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 72" (1828.8 mm) long
- Hole Count: 13
- Mounting Requirements:
  
  (13) Plow Bolts – 3/4" x 2 1/4" (750 x 225 mm)
  
  (13) Hex Nuts – 3/4" (750 HEX)
- Hole Spacing:
  
  3" (76.2 mm) from edge to center of 1st hole
  
  3" (76.2 mm) from center of 1st to 2nd hole
  
  6" (152.4 mm) from center of 2nd to 3rd hole
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Heat treated for durability in abrasive conditions
- Curved edge for smooth grading and material flow
- Accurate bolt spacing ensures strong, vibration-resistant fit
- Compatible with Caterpillar graders and AU Buckets systems
AU GET supplied by AU Buckets & Equipment – engineered tough for Australian terrain.
$230.00 Plus GST
SKU: 7D1576
Available: 17
Add to Quote
7D1158 – Grader Blade HT 7’x8x5/8 – 15x 3/4 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is designed for high-performance grading across construction, roadwork, and maintenance applications. With...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade is designed for high-performance grading across construction, roadwork, and maintenance applications. With a profile of 5/8" thick, 8" wide, and 7 feet long, this blade features a 15-hole configuration and is heat treated to deliver consistent wear life and cutting performance in abrasive conditions.

Product Specifications:

Blade Style: Curved, Heat Treated

Dimensions: 5/8" (15.88 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long

Hole Count: 15

Mounting Requirements:

(15) Plow Bolts – 3/4" x 2 3/4" (750 x 275 mm)

(15) Hex Nuts – 3/4" (750 HEX)

Hole Pattern: Standard Caterpillar spacing

Material: Heat treated alloy steel

Hardness: Tested to yield strength between 450–500

Key Features:

Curved edge profile for efficient cutting and material flow

Heat treated for improved toughness and extended life

15-hole bolt-on design ensures secure fit and easy replacement

Ideal for Caterpillar graders and fully compatible with AU Buckets blade systems

AU GET supplied by AU Buckets & Equipment – built for reliability on rugged Australian job sites.
$230.00 Plus GST
SKU: 7D1158
Available: 20
Add to Quote
5D9558 – Grader Blade HT 6’x8x3/4 – 13x 5/8 holes
Caterpillar-Style Grader Blade: Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm) Curved and heat-treated for enhanced durability 13-hole configuration Fastener Requirements:...
Read More
- Caterpillar-Style Grader Blade:
  
  Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm)
  
  Curved and heat-treated for enhanced durability
  
  13-hole configuration
- Fastener Requirements:
  
  13 plow bolts: 5/8" x 2 3/4" (15.875 mm x 69.85 mm)
  
  13 hex nuts: 5/8" (15.875 mm)
- OEM Part Number: 5D-9558
- Design Features:
  
  Engineered for heavy-duty grading applications
  
  Universal, used with various brand graders.
  
  Heat-treated for increased strength and wear resistance
$230.00 Plus GST
SKU: 5D9558
Available: 20
Add to Quote
BSH-B501 – Right Hand Hitachi Sidecutter – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B501
Available: 12
Add to Quote
7D1949 – Grader Blade HT 8’x8x3/4 – 17x 3/4 holes
Caterpillar style 3/4"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4" plow bolt and 17 of a...
Read More
Caterpillar style 3/4"X 8"X 8’ curved, heat treated, 17 hole grader blade; takes 17 of a 3/4"X 2 3/4" plow bolt and 17 of a 3/4" hex nut. The bolt hole spacing is 3"from the edge to the center of the 1st hole, and 3"from the center of the 1st hole to the center of the 2nd hole, and 6"from center of the 2^nd hole to the center of the 3^rd hole.
$220.00 Plus GST
SKU: 7D1949
Available: 23
Add to Quote
Sold as a Pair

BSH-B500 – Left Hand Hitachi Sidecutter (LH) – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B500
Available: 12
Add to Quote
208-70-34170 – Komatsu style PC400 Side Cutter LH
AU GET supplied by AU Buckets & Equipment This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection...
Read More
AU GET supplied by AU Buckets & Equipment

This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection against wear and impact. Built from high-strength alloy steel, it extends bucket life and improves penetration efficiency in abrasive or high-impact digging environments.

Product Specifications:
- Part Numbers: 208-70-34160 (LH) / 208-70-34170 (RH)
- Machine Fitment: Komatsu PC400
- Shape: Five-Hole Side Cutter
- Weight: 22.5 kg
- Hardness: 48–52 HRC
- Impact Value: >20 J
- Material: Heat-treated, abrasion-resistant alloy steel
Key Features:
- Five-bolt mounting for a strong, secure fit
- Protects the bucket side walls and improves overall cutting performance
- Suitable for heavy-duty applications including quarrying, trenching, and earthworks
- Compatible with OEM Komatsu buckets and AU Buckets edge systems
AU GET supplied by AU Buckets & Equipment – side protection you can trust for serious digging.
$210.00 Plus GST
SKU: 208-70-34170
Available: 3
Add to Quote
208-70-34160 – Komatsu style PC400 Side Cutter RH
AU GET supplied by AU Buckets & Equipment This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection...
Read More
AU GET supplied by AU Buckets & Equipment

This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection against wear and impact. Built from high-strength alloy steel, it extends bucket life and improves penetration efficiency in abrasive or high-impact digging environments.

Product Specifications:
- Part Numbers: 208-70-34160 (LH) / 208-70-34170 (RH)
- Machine Fitment: Komatsu PC400
- Shape: Five-Hole Side Cutter
- Weight: 22.5 kg
- Hardness: 48–52 HRC
- Impact Value: >20 J
- Material: Heat-treated, abrasion-resistant alloy steel
Key Features:
- Five-bolt mounting for a strong, secure fit
- Protects the bucket side walls and improves overall cutting performance
- Suitable for heavy-duty applications including quarrying, trenching, and earthworks
- Compatible with OEM Komatsu buckets and AU Buckets edge systems
AU GET supplied by AU Buckets & Equipment – side protection you can trust for serious digging.
$200.00 Plus GST
SKU: 208-70-34160
Available: 3
Add to Quote
253-0063 – Corner Protector LH
AU GET supplied by AU Buckets & Equipment This left-hand heavy duty corner protector is designed for buckets using the CAT J300 tooth system, specifically...
Read More
AU GET supplied by AU Buckets & Equipment

This left-hand heavy duty corner protector is designed for buckets using the CAT J300 tooth system, specifically for Caterpillar 950 to 963 series loaders. Ideal for high-wear applications, it safeguards the outer bucket corner from impact and abrasion, helping extend the life of your lip and cutting edges.

Product Specifications:
- Part Type: Left-Hand Corner Protector
- Tooth Series: CAT J300
- Compatible Machines: CAT 950, 960, 962, 963
- Mounting Hardware Required:
  
  2 × 1¼" x 3½" (125 x 350) Plow Bolts
  
  2 × 1¼" (125 HEX) Hex Nuts
- Material: High-strength, wear-resistant alloy steel
- Mounting Style: Bolt-on configuration
Key Features:
- Heavy-duty design for maximum corner protection
- Resists abrasion and impact in rugged operating environments
- Easy installation with standard hardware
- Fully compatible with OEM CAT buckets and AU Buckets wear packages
AU GET supplied by AU Buckets & Equipment – protecting your cutting edges where it counts.
$200.00 Plus GST
SKU: 2530063
Available: 9
Add to Quote
253-0062 – Corner Protector RH
AU GET supplied by AU Buckets & Equipment This heavy-duty right-hand corner protector is designed for buckets using the J300 series tooth system, typically found...
Read More
AU GET supplied by AU Buckets & Equipment

This heavy-duty right-hand corner protector is designed for buckets using the J300 series tooth system, typically found on CAT 950 to 963 models. Built for durability in high-wear zones, it shields the outer corners of the bucket lip from impact and abrasion, significantly extending the service life of your bucket.

Product Specifications:
- Application: Right-hand corner protector
- Tooth System Compatibility: CAT J300
- Machine Fitment: CAT 950 to 963 series
- Mounting Hardware:
  
  Bolts: 2 × 1¼" x 3½" (125 x 350) plow bolts
  
  Nuts: 2 × 1¼" (125 HEX) hex nuts
- Material: Cast high-strength alloy steel
- Installation: Bolt-on
Key Features:
- Reinforced design for high-impact resistance
- Protects the bucket’s lip and corner welds from excessive wear
- Easy bolt-on installation for quick field replacement
- Compatible with CAT OEM and AU Buckets edge systems
AU GET supplied by AU Buckets & Equipment – protecting your investment one corner at a time.
$200.00 Plus GST
SKU: 2530062
Available: 9
Add to Quote
5D9557 – Grader Blade HT 7’x6x3/4 – 15x 5/8 holes
Caterpillar-Style Curved Grader Blade – 3/4" x 6" x 7' (15 Hole, Heat Treated)AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader...
Read More
Caterpillar-Style Curved Grader Blade – 3/4" x 6" x 7' (15 Hole, Heat Treated)
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style curved grader blade measures 3/4" thick, 6" wide, and 7 feet long, making it ideal for general grading, roadwork, and earthmoving applications. Heat treated for increased wear resistance, it features 15 evenly spaced holes and is designed to bolt directly to most standard grader moldboards.

Product Specifications:
- Blade Style: Curved, Heat Treated
- Dimensions: 3/4" (19.05 mm) thick x 6" (152.4 mm) wide x 84" (2133.6 mm) long
- Hole Count: 15
- Mounting Requirements:
  
  (15) Plow Bolts – 5/8" x 2 3/4" (625 x 275 mm)
  
  (15) Hex Nuts – 5/8" (625 HEX)
- Hole Pattern: Standard Caterpillar spacing
- Material: Heat treated alloy steel
- Hardness: Tested to yield strength between 450–500
Key Features:
- Curved profile for smooth cutting and rolling action
- Heat treated for improved durability and impact resistance
- 15-hole configuration for secure mounting and reduced vibration
- Compatible with Caterpillar graders and AU Buckets blade systems
AU GET supplied by AU Buckets & Equipment – built for performance in demanding Australian grading conditions.
$200.00 Plus GST
SKU: 5D9557
Available: 10
Add to Quote
Corner Protector LH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530065
Available: 5
Add to Quote
Corner Protector RH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530064
Add to Quote
SCB-70-250 – Weld on lip shroud to suit 60mm – 75mm lip edge
e SCB-70-250 is a heavy-duty weld-on lip shroud designed to protect bucket lips ranging from 60mm to 75mm thick. Ideal for demanding earthmoving, quarrying, and...
Read More
e SCB-70-250 is a heavy-duty weld-on lip shroud designed to protect bucket lips ranging from 60mm to 75mm thick. Ideal for demanding earthmoving, quarrying, and mining applications, this shroud provides extended wear life and edge protection on excavator and loader buckets. Model: SCB-70-250 Lip Size Compatibility: Suits 60mm to 75mm thick bucket lips Width: 250mm coverage Mounting: Weld-on application Design: Curved profile for enhanced lip coverage and ground penetration Material: Cast high-tensile alloy steel for superior abrasion resistance Application: Suitable for general purpose to heavy-duty buckets Weld directly to the bucket lip for maximum protection and extended service life.
$190.00 Plus GST
SKU: SCB-70-250
Available: 10
Add to Quote
ES6697-2 – ESC0 style Heel Shroud (80-180 Tonne)
AU GET supplied by AU Buckets & Equipment This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from...
Read More
AU GET supplied by AU Buckets & Equipment

This heavy-duty heel block is engineered to protect the high-wear corners of excavator and loader buckets from abrasion and impact. Made from high-strength alloy steel, it enhances bucket longevity and reduces the risk of edge failure in demanding conditions.

Product Specifications:
- Weight: 22 kg
- Recommended Excavator Size: 30–100 tonne
- Bottom Pad Thickness: 50 mm
- Bottom Pad Depth: 250 mm
- Width: 188 mm
- Height: 150 mm
- Original Manufacturer Reference: ESCO
- Machine Type: Excavator / Loader
- Common Names: Wear Shoe, Corner Wear Shoe, Bucket Protector, L Shape Protector
Key Features:
- Designed to reinforce and protect high-wear corners of machinery buckets
- Suitable for a wide range of bucket sizes and machine types
- Fabricated from abrasion-resistant alloy steel for extended wear life
- Easy to weld on for fast field installation or rebuilds
AU GET supplied by AU Buckets & Equipment – protecting your edge, preserving your power.
$180.00 Plus GST
SKU: ES6697-2
Available: 1
Add to Quote
5D9556 – Grader Blade HT 6’x6x3/4 – 13x 5/8 holes
Built to tackle tough grading jobs, this Caterpillar style curved grader blade is heat treated for increased strength and wear resistance. Ideal for use on...
Read More
Built to tackle tough grading jobs, this Caterpillar style curved grader blade is heat treated for increased strength and wear resistance. Ideal for use on graders and other compatible machines, this blade delivers efficient material movement and long-lasting performance in abrasive conditions.

Specifications:
- Dimensions: 5/8" thick x 6" wide x 7' (84") long
- Style: Curved, heat treated
- Bolt Holes: 15 evenly spaced
- Bolt Hole Size: 5/8"
- Bolt Hole Spacing: Standard grader configuration
- Bolt Type: Requires 15 plow bolts (5/8" x 2 3/4", 625X275)
- Nut Type: Requires 15 hex nuts (5/8", 625 HEX NUT)
Key Features:
- Curved edge design enhances cutting and rolling action for superior grading performance
- Heat treated for extended wear life and durability
- 15-hole configuration ensures secure mounting
- Designed for use with Caterpillar and compatible grader machines
- Easy bolt-on installation with industry-standard hardware
$180.00 Plus GST
SKU: 5D9556
Available: 18
Add to Quote
SOLD OUT _ More Stock Arriving Soon
5D9562 – Grader Blade HT 6’x8x5/8 – 13x 5/8″ holes
Grader Blade Dimensions: Thickness: 15.88 mm (0.625 inches) Width: 203.2 mm (8 inches) Length: 1,828.8 mm (6 feet or 72 inches) Bolt Specifications: Bolt Size:...
Read More
Grader Blade Dimensions:
- Thickness: 15.88 mm (0.625 inches)
- Width: 203.2 mm (8 inches)
- Length: 1,828.8 mm (6 feet or 72 inches)
Bolt Specifications:
- Bolt Size: 15.88 mm × 57.15 mm (5/8" × 2 1/4")
- Hex Nut Size: 15.88 mm (5/8" HEX NUT)
Bolt Hole Spacing:
- From the edge to the center of the 1st hole: 76.2 mm (3 inches)
- From the center of the 1st hole to the center of the 2nd hole: 76.2 mm (3 inches)
- From the center of the 2nd hole to the center of the 3rd hole: 152.4 mm (6 inches)
Bolt Diameter: 0.75
Blade Type: Grader Blade
Hole 1 Distance End to 1st Hole: 3
Hole 1 Distance 1st to 2nd Hole: 3
Machine Type: GRADER
Hole 1 Distance 2nd to 3rd Hole: 6
Length: 96
$180.00 Plus GST
SKU: 5D9562
Out of stock
Add to Quote
5D9554 – Grader Blade HT 7’x6x5/8 – 15x 5/8 holes
The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is...
Read More
- The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is designed to suit various Caterpillar buckets, including 72" and 78" skid steer models.
  
  Specifications:
  
  Part Number: 5D9554
  
  Length: 80.579"
  
  Width: 6.5"
  
  Thickness: 0.625" (5/8")
  
  Bolt Hole Count: 11
  
  Bolt Hole Spacing: 4.65" center-to-center
  
  Edge to First Hole Distance: 2.96"
  
  Bolt Type: 5/8" x 2" (625X200) plow bolts
  
  Nut Type: 5/8" (625 HEX NUT) hex nuts
  
  Bevel: Double beveled
  
  Reversible: Yes
  
  Key Features:
  
  Manufactured from high-strength steel for extended wear life
  
  Double beveled edge offers smooth digging and back grading
  
  Reversible design doubles the usable lifespan
  
  Easy bolt-on installation with standard hardware
  
  Commonly used on Caterpillar skid steer loader buckets
$180.00 Plus GST
SKU: 5D9554
Out of stock
Add to Quote
Sold per each

112-2489-40 Side shroud to suit 30-40T skeleton bucket
Side shroud to suit 30-40T skeleton bucket. Has 40mm gap. P/n 112-2489-40. Price is for 1 shroud
Read More
Side shroud to suit 30-40T skeleton bucket. Has 40mm gap. P/n 112-2489-40. Price is for 1 shroud
$175.00 Plus GST
SKU: AU30-40TSIDECUTSKEL
Add to Quote
Sold per each

112-2489-30 Cat Style Wing Shroud
AU13-20TSIDECUTSKEL - Side shrouds to suit 13-20T skeleton bucket. Has 30mm gap. P/n 112-2489-30. Price is for 1 shroud
Read More
AU13-20TSIDECUTSKEL - Side shrouds to suit 13-20T skeleton bucket. Has 30mm gap. P/n 112-2489-30. Price is for 1 shroud
$175.00 Plus GST
SKU: AU13-20TSIDECUTSKEL
Add to Quote
7Y0358 – Caterpillar Style Left Hand 3-Bolt Sidecutter – AU30-40TSIDECUTTRENCH
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4"...
Read More
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4" (102 mm) 5.25" (133 mm) 7.875" (200 mm)
$170.00 Plus GST
SKU: 7Y0358
Available: 10
Add to Quote
Sold as a Pair

7Y0357 – Caterpillar Style Right Hand 3-Bolt Sidecutter – AU30-40TSIDECUTTRENCH
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4"...
Read More
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4" (102 mm) 5.25" (133 mm) 7.875" (200 mm)
$170.00 Plus GST
SKU: 7Y0357
Available: 10
Add to Quote
9J9600 – CAT style Wing Shroud suits 35mm Cheek
AU GET supplied by AU Buckets & Equipment Part #9J9600 is a CAT style wing shroud engineered to protect the 35 mm thick cheek plates...
Read More
AU GET supplied by AU Buckets & Equipment

Part #9J9600 is a CAT style wing shroud engineered to protect the 35 mm thick cheek plates of loader and excavator buckets. Designed to reduce wear on high-impact side areas, this shroud extends bucket life and reinforces structural strength—ideal for abrasive and high-load applications such as quarrying, demolition, and heavy civil works.

Product Specifications:
- Part Number: 9J9600
- Type: Wing Shroud / Side Wear Protector
- Cheek Plate Fitment: 35 mm
- Application: Side wall protection for buckets in abrasive and high-impact environments
- Material: High-strength, wear-resistant alloy steel
- Mounting Style: Weld-on
Key Features:
- Shields bucket sidewalls from excessive wear and impact damage
- Thickened profile for extended life in abrasive applications
- Compatible with CAT OEM buckets and AU Buckets systems
- Easy weld-on installation for new builds or bucket rebuilds
AU GET supplied by AU Buckets & Equipment – shield your side, dig with pride.
$165.00 Plus GST
SKU: 9J9600
Available: 8
Add to Quote