GET

Showing 1–36 of 81 resultsSorted by price: high to low

109-9212 Centre Edge 35mm suits CAT 980 F G H
AU GET supplied by AU Buckets & Equipment This Caterpillar-style bolt-on center cutting edge is a double beveled, reversible edge built for heavy-duty use on...
Read More
AU GET supplied by AU Buckets & Equipment

This Caterpillar-style bolt-on center cutting edge is a double beveled, reversible edge built for heavy-duty use on 980G Caterpillar Front End Loaders. Designed to provide superior wear life and clean cuts, it’s ideal for maintaining peak bucket performance in high-load environments.

Product Specifications:
- Application: Center Cutting Edge for CAT 980G Front End Loader
- Type: Double Beveled, Reversible
- Thickness: 1.375 in (34.93 mm)
- Width: 16 in (406.4 mm)
- Length: 57 in (1447.8 mm)
- Bolt Hole Spacing:
  
  19.06 in (484.12 mm) center-to-center
  
  9.44 in (239.78 mm) from edge to first hole center
- Mounting Requirements:
  
  (3) Plow Bolts – 1 1/4" x 4 1/2" (125 x 450 mm)
  
  (3) Hex Nuts – 1 1/4" (125 HEX)
Key Features:
- Reversible edge design extends product lifespan
- Wide profile for increased bucket protection and strength
- Simple bolt-on installation for fast, efficient servicing
- Perfect fit for loaders running AU Buckets or similar bucket systems
AU GET supplied by AU Buckets & Equipment – trusted strength for serious Australian worksites.
$910.00 Plus GST
SKU: 1099212
Available: 2
Add to Quote
Centre Edge 45mm suits CAT D10 N, R, T SU
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...
Read More
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick, 16"wide and 39.125"in length. It takes 6 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 6 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 6"from center to center of the bolt holes, and 4.563"when measured from the edge of the bucket cutting edge to the center of the first hole. 9W-6656
$550.00 Plus GST
SKU: 9W6656
Available: 4
Add to Quote
Centre Edge 35mm D8 N, R, T, D9 L
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...
Read More
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 53.25 inches (1353 mm) long, requiring 9 plow bolts sized 1 x 3 1/4 inches (25.4 mm x 82.55 mm) and 9 hex nuts sized 1 inch (25.4 mm); the bolt hole spacing is 6 inches (152.4 mm) center-to-center, and 2.63 inches (66.8 mm) from the edge of the cutting edge to the center of the first hole.
$520.00 Plus GST
SKU: 7T9126
Available: 7
Add to Quote
9W8365 – CAT style D9 & D10 Ripper Guard suits 90mm Shank
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$500.00 Plus GST
SKU: 9W8365
Available: 8
Add to Quote
116-7460 – Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$450.00 Plus GST
SKU: 116-7460
Available: 2
Add to Quote
Centre Edge 35mm suits CAT D10 N, R, T SU
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...
Read More
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16 inches (406.4 mm) wide, and 39.125 inches (993.18 mm) in length. It requires six 1 1/4 x 4 1/4 inch (31.75 x 107.95 mm) plow bolts and six 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 6 inches (152.4 mm) from center to center and 4.563 inches (115.98 mm) from the edge of the bucket cutting edge to the center of the first hole. 9W-6609
$440.00 Plus GST
SKU: 9W6609
Available: 1
Add to Quote
End Bit Hot Cup 50mm RH suits CAT D8 L D9 G H N R T 844
Type: Caterpillar-style bolt-on end bit Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 2 inches (50.8 mm) Width: 16 inches (406.4 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 2 inches (50.8 mm)
  
  Width: 16 inches (406.4 mm)
  
  Length: 24 inches (609.6 mm)
- Fasteners Required:
  
  Seven 1 x 3 1/4 inch (25.4 x 82.55 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.56 inches (90.42 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4197
$350.00 Plus GST
SKU: 8E4197
Available: 1
Add to Quote
8E4193 – End Bit Hot Cup 40mm RH suits CAT D8 N, R, T
Caterpillar-Style End Bit – Part 8E-4193 (Right-Hand, Bolt-On) Type: Hot-cupped right-hand end bit Application: Fits Caterpillar D8 bulldozer (bolt-on cutting edge system) Part Number: 8E-4193...
Read More
Caterpillar-Style End Bit – Part 8E-4193 (Right-Hand, Bolt-On) Type: Hot-cupped right-hand end bit Application: Fits Caterpillar D8 bulldozer (bolt-on cutting edge system) Part Number: 8E-4193 Mounting Style: Bolt-on end bit Specifications: Thickness: 1.625 in (41.28 mm) Width: 15.875 in (403.23 mm) Length: 23.5 in (596.9 mm) Material: Heat-treated, through-hardened alloy steel for superior wear resistance Cutting Edge Type: Curved / hot-cupped profile for smooth material flow and long service life Bolt & Nut Requirements: Bolts: Seven (7) × 1" × 3" plow bolts (25.4 mm × 76.2 mm) Nuts: Seven (7) × 1" hex nuts (25.4 mm) Bolt Hole Spacing: 4" (101.6 mm) center-to-center Edge to First Hole Distance: 3.75" (95.25 mm) from blade edge to first hole center Features: Precision-machined for exact OEM fitment on Caterpillar D8 dozer blades High-strength steel ensures resistance to impact, abrasion, and bending Easy to install and replace with standard plow bolts and nuts Complements left-hand end bit 8E-4194 for complete blade edge assembly Common Use: Right-hand end bit for D8 Caterpillar bulldozer blade systems Suitable for dozing, grading, and general earthmoving applications
$350.00 Plus GST
SKU: 8E4193
Available: 5
Add to Quote
8E4194 – End Bit Hot Cup 40mm LH suits CAT D8 N, R, T
<Caterpillar-Style End Bit – Part 8E-4194 (Left-Hand, Bolt-On) Type: Hot-cupped left-hand end bit Application: Fits Caterpillar D8 bulldozer (bolt-on cutting edge system) Part Number: 8E-4194...
Read More
<Caterpillar-Style End Bit – Part 8E-4194 (Left-Hand, Bolt-On) Type: Hot-cupped left-hand end bit Application: Fits Caterpillar D8 bulldozer (bolt-on cutting edge system) Part Number: 8E-4194 Mounting Style: Bolt-on end bit Specifications: Thickness: 1.625 in (41.28 mm) Width: 15.875 in (403.23 mm) Length: 23.5 in (596.9 mm) Material: Heat-treated, through-hardened alloy steel for wear resistance Cutting Edge Type: Curved / hot-cupped profile for better material flow Bolt & Nut Requirements: Bolts: Seven (7) × 1" × 3" plow bolts (25.4 mm × 76.2 mm) Nuts: Seven (7) × 1" hex nuts (25.4 mm) Bolt Hole Spacing: 4" (101.6 mm) center-to-center Edge to First Hole Distance: 3.75" (95.25 mm) from bucket edge to first hole center Features: Precision-formed for exact fit to Caterpillar D8 cutting edge system OEM-style design ensures reliable mounting and alignment Hardened steel construction for maximum service life in abrasive ground conditions Designed for easy installation and replacement with standard plow bolts and nuts Common Use: Left-hand end bit on D8 dozer blade assemblies Compatible with matching right-hand bit 8E-4193
$350.00 Plus GST
SKU: 8E4194
Available: 5
Add to Quote
1U0761 – End Edge 40mm suits CAT 980 B, C, F, G, H, 988 B, F, G, H
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...
Read More
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28 mm) thick, 10.375 inches (263.53 mm) wide, and 22 inches (558.8 mm) in length. It requires three 1 1/4 x 4 1/2 inch (31.75 x 114.3 mm) plow bolts and three 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 3.13 inches (79.5 mm) from center to center and 7.88 inches (200.15 mm) from the edge of the bucket cutting edge to the center of the first hole. 1U-0761
$265.00 Plus GST
SKU: 1U0761
Available: 16
Add to Quote
SOLD OUT _ More Stock Arriving Soon
5D9559 – Grader Blade HT 7’x8x3/4 – 15x 5/8 holes
AU GET supplied by AU Buckets & Equipment This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8"...
Read More
- AU GET supplied by AU Buckets & Equipment
  
  This Caterpillar-style curved grader blade is built for demanding roadwork and earthmoving applications. Measuring 3/4" thick, 8" wide, and 7 feet long, this blade features a 15-hole standard mounting pattern and is heat treated for maximum durability. Designed to deliver long wear life, clean cutting, and reliable performance in abrasive environments.
  
  Product Specifications:
  
  Blade Style: Curved, Heat Treated
  
  Dimensions: 3/4" (19.05 mm) thick x 8" (203.2 mm) wide x 84" (2133.6 mm) long
  
  Hole Count: 15
  
  Mounting Requirements:
  
  (15) Plow Bolts – 5/8" x 2 3/4" (625 x 275 mm)
  
  (15) Hex Nuts – 5/8" (625 HEX)
  
  Hole Pattern: Standard Caterpillar spacing
  
  Material: Heat treated alloy steel
  
  Hardness: Tested to yield strength between 450–500
  
  Key Features:
  
  Curved profile for efficient cutting and grading
  
  Heat treated for enhanced strength and wear resistance
  
  15-hole design for secure, stable mounting
  
  Ideal for Caterpillar graders and compatible with AU Buckets blade systems
  
  AU GET supplied by AU Buckets & Equipment – engineered tough for Australian grading conditions.
$260.00 Plus GST
SKU: 5D9559
Out of stock
Add to Quote
4T5502-F – FORGED STEEL CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$250.00 Plus GST
SKU: 4T5502-F
Available: 4
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8287
$250.00 Plus GST
SKU: 3G8287
Available: 1
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8288
$250.00 Plus GST
SKU: 3G8288
Available: 1
Add to Quote
Sold as a Pair

096-4747/4748 – Caterpillar Sidecutters-4 BOLT (AU20TSIDECUTTRENCH)
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
Read More
Side cutters to suit AU 20T trench bucket. Sold as pairs. P/n 096-4747 & 096-4748, E200B L/R
$250.00 Plus GST
SKU: AU20TSIDECUTTRENCH
Available: 6
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 8
Add to Quote
4T5502 – CAT style D10 / R500 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$230.00 Plus GST
SKU: 4T5502
Available: 15
Add to Quote
5D9558 – Grader Blade HT 6’x8x3/4 – 13x 5/8 holes
Caterpillar-Style Grader Blade: Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm) Curved and heat-treated for enhanced durability 13-hole configuration Fastener Requirements:...
Read More
- Caterpillar-Style Grader Blade:
  
  Dimensions: 3/4" (19.05 mm) x 8" (203.2 mm) x 6' (1828.8 mm)
  
  Curved and heat-treated for enhanced durability
  
  13-hole configuration
- Fastener Requirements:
  
  13 plow bolts: 5/8" x 2 3/4" (15.875 mm x 69.85 mm)
  
  13 hex nuts: 5/8" (15.875 mm)
- OEM Part Number: 5D-9558
- Design Features:
  
  Engineered for heavy-duty grading applications
  
  Universal, used with various brand graders.
  
  Heat-treated for increased strength and wear resistance
$230.00 Plus GST
SKU: 5D9558
Available: 7
Add to Quote
CAT style Router Bit Heavy Duty suits 630 D, C, D, E, G, 631 D, C, D, E, G, 633, D, E 637 D, C, D, E, G, 639 D, E, 650 B, 651 B, E, F 657 B, E, F, 660 B, 666 B
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5...
Read More
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5 - 1" X 3" plow bolts and 5 - 1" hex nuts; the bolt hole spacing is 5.25" from the edge to the center of the 1st hole, 2.5" from 1st to 2nd hole, 3.5" from the 2nd to 3rd hole, 3.5" from the 3rd to 4th hole, 2.5" from the 4th to 5th hole and 5.25" from the 5th hole to the edge; this router bit is 9.5" wide and 22" long
$230.00 Plus GST
SKU: 7J3023
Available: 6
Add to Quote
BSH-B501 – Right Hand Hitachi Sidecutter – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B501
Available: 12
Add to Quote
Sold as a Pair

BSH-B500 – Left Hand Hitachi Sidecutter (LH) – AU20-40TSIDESHROUDTRENCH
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R) BSH-46R & BSH46L
Read More
Location: 5.B4 - Side shrouds (GOANNAS) to suit AU 20-40T Trench buckets. Price is for 1 shroud. BSH B500/B501, (EX300L/R)

BSH-46R & BSH46L
$220.00 Plus GST
SKU: BSH-B500
Available: 12
Add to Quote
135-9395 – Skid Steer Edge 16mm suits CAT 8 holes 228mm HC, 68.5″ (1743mm)
Part Number: 135-9395 Description: Bolt-on cutting edge Dimensions: Thickness: 0.625 inches (15.88 mm) Width: 6.5 inches (165.1 mm) Length: 68.625 inches (1,743.08 mm) Hole Specifications:...
Read More
- Part Number: 135-9395
- Description: Bolt-on cutting edge
- Dimensions:
  
  Thickness: 0.625 inches (15.88 mm)
  
  Width: 6.5 inches (165.1 mm)
  
  Length: 68.625 inches (1,743.08 mm)
- Hole Specifications:
  
  Quantity: 8 bolt holes
  
  Bolt Diameter: 5/8 inch (15.88 mm)
  
  Bolt Length: 2 inches (50.8 mm)
  
  Bolt Hole Spacing:
  
  9 inches (228.6 mm) center-to-center
  
  2.81 inches (71.37 mm) from the edge to the center of the first hole
- Compatible Models:
  
  Caterpillar 66" Skid Steer Buckets
- Material: Moderate impact resistance for versatility across various applications
- Function: Protects the bucket lip from damage and wear, enhancing the bucket's lifespan
This cutting edge is double-beveled and reversible, allowing for extended use before replacement is necessary. Proper maintenance ensures maximum efficiency and durability for the equipment.
$210.00 Plus GST
SKU: 1359395-58
Available: 8
Add to Quote
9W8552RC – Rock Chisel Bucket Tooth – Caterpillar Style J550 Series
J550 Tooth, p/n 9W8552RC. xref no 159-0559. Price per each. Pin and Retainer also available for purchase. Caterpillar style SYL version bucket tooth for a...
Read More
J550 Tooth, p/n 9W8552RC. xref no 159-0559. Price per each. Pin and Retainer also available for purchase.

Caterpillar style SYL version bucket tooth for a J550 series; takes a 6Y8558 pin and an 8E5559 sleeved retainer.

$210.00 Plus GST
SKU: 9W8552RC
Available: 19
Add to Quote
AU90ADAPTORJ450
CAT style J450/J460 Twin Strap Excavator Adapter Suits 50mm Lip Part Number: 6I6464 / 8E6464 / 1590464 Model Compatibility: Cat 330 Family: J450/460 Shape: Two Strap Center Adapter ...
Read More
CAT style J450/J460 Twin Strap Excavator Adapter Suits 50mm Lip
- Part Number: 6I6464 / 8E6464 / 1590464
- Model Compatibility: Cat 330
- Family: J450/460
- Shape: Two Strap Center Adapter
$200.00 Plus GST
SKU: AU1590464
Available: 10
Add to Quote
65AMRE – Volvo Style Chisel Tooth
other part number ref: 14522959, 14526510, 14624280
Read More
other part number ref: 14522959, 14526510, 14624280
$180.00 Plus GST
SKU: 65AMRE
Available: 20
Add to Quote
5D9554 – Grader Blade HT 7’x6x5/8 – 15x 5/8 holes
The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is...
Read More
- The 5D9554 is a high-performance double beveled reversible bolt-on cutting edge, engineered for durability and efficiency in a wide range of earthmoving applications. It is designed to suit various Caterpillar buckets, including 72" and 78" skid steer models.
  
  Specifications:
  
  Part Number: 5D9554
  
  Length: 80.579"
  
  Width: 6.5"
  
  Thickness: 0.625" (5/8")
  
  Bolt Hole Count: 11
  
  Bolt Hole Spacing: 4.65" center-to-center
  
  Edge to First Hole Distance: 2.96"
  
  Bolt Type: 5/8" x 2" (625X200) plow bolts
  
  Nut Type: 5/8" (625 HEX NUT) hex nuts
  
  Bevel: Double beveled
  
  Reversible: Yes
  
  Key Features:
  
  Manufactured from high-strength steel for extended wear life
  
  Double beveled edge offers smooth digging and back grading
  
  Reversible design doubles the usable lifespan
  
  Easy bolt-on installation with standard hardware
  
  Commonly used on Caterpillar skid steer loader buckets
$180.00 Plus GST
SKU: 5D9554
Out of stock
Add to Quote
V43-8801 – V Series Twin Strap Excavator Adapter suits 50mm Lip
Twist tooth adapter for 50mm Lip, suits V43 tooth or FT430
Read More
Twist tooth adapter for 50mm Lip, suits V43 tooth or FT430
$175.00 Plus GST
SKU: V43-8801
Available: 6
Add to Quote
Sold per each

112-2489-40 Side shroud to suit 30-40T skeleton bucket
Side shroud to suit 30-40T skeleton bucket. Has 40mm gap. P/n 112-2489-40. Price is for 1 shroud
Read More
Side shroud to suit 30-40T skeleton bucket. Has 40mm gap. P/n 112-2489-40. Price is for 1 shroud
$175.00 Plus GST
SKU: AU30-40TSIDECUTSKEL
Add to Quote
Sold per each

112-2489-30 Cat Style Wing Shroud
AU13-20TSIDECUTSKEL - Side shrouds to suit 13-20T skeleton bucket. Has 30mm gap. P/n 112-2489-30. Price is for 1 shroud
Read More
AU13-20TSIDECUTSKEL - Side shrouds to suit 13-20T skeleton bucket. Has 30mm gap. P/n 112-2489-30. Price is for 1 shroud
$175.00 Plus GST
SKU: AU13-20TSIDECUTSKEL
Add to Quote
7Y0358 – Caterpillar Style Left Hand 3-Bolt Sidecutter – AU30-40TSIDECUTTRENCH
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4"...
Read More
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4" (102 mm) 5.25" (133 mm) 7.875" (200 mm)
$170.00 Plus GST
SKU: 7Y0358
Available: 10
Add to Quote
Sold as a Pair

7Y0357 – Caterpillar Style Right Hand 3-Bolt Sidecutter – AU30-40TSIDECUTTRENCH
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4"...
Read More
Heavy-duty right-hand sidecutter designed for excavators. Takes 3 × 100 × 300 plow bolts and 3 × 100 hex nuts Bolt hole spacing (centre-to-centre): 4" (102 mm) 5.25" (133 mm) 7.875" (200 mm)
$170.00 Plus GST
SKU: 7Y0357
Available: 10
Add to Quote
9W2452 – CAT style D8 & D9 Ripper Centreline Intermediate
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
Read More
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E5559 retainer
$150.00 Plus GST
SKU: 9W2452
Available: 7
Add to Quote
V51TVY – ESC0 style V Series Twin Tiger Tooth
V51 series twin tiger, bucket tooth for a 51 series, takes a V51PN flex pin
Read More
V51 series twin tiger, bucket tooth for a 51 series, takes a V51PN flex pin
$150.00 Plus GST
SKU: V51TVY
Available: 7
Add to Quote
V51VY – ESC0-Style V-Series Single Tiger Tooth
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
Read More
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
$150.00 Plus GST
SKU: V51VY
Available: 5
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Edge Segment 30mm suits CAT 980 F G H1099019
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and...
Read More
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and 12.5"in length. It takes 2 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 2 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 7.28"from center to center of the bolt holes, and 2.61"when measured from the edge of the bucket cutting edge to the center of the first hole.
$150.00 Plus GST
SKU: 1099019
Out of stock
Add to Quote
1U3552WTL – Caterpillar Style Twin Tiger Long Bucket Tooth (J550 Series)
Caterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer. - P/N 1U3552WTL
Read More
Caterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer.

- P/N 1U3552WTL
$150.00 Plus GST
SKU: AUJ550TIGER
Available: 6
Add to Quote

Showing 1–36 of 81 resultsSorted by price: high to low

GET

James Johnson

Jane Doe

John Smith

Quick Links

Contact Us

Subscribe to our newsletter