AU GET supplied by AU Buckets & Equipment

The ES6697-5 is an ESC0-style weld-on heel shroud, designed to protect high-wear areas on the lower outside corners of excavator and loader buckets. Ideal for extreme abrasion environments, this heavy-duty shroud adds an extra layer of defense where buckets wear fastest – improving bucket life and performance in tough digging, quarrying, and mining conditions.

---

Product Specifications:

• Part Number: ES6697-5

• Style: ESC0 Heel Shroud

• Mounting: Weld-on

• Position: Outer bucket heel (left/right interchangeable)

• Material: High-strength, wear-resistant alloy steel

• Common Use: Excavators & loaders in abrasive or high-impact environments

---

Key Features:

• Reinforces bucket corners to reduce structural wear

• Helps prevent cracking and distortion of bucket sides

• Heavy-duty construction for abrasive and impact-resistant protection

• Suits a range of mid- to large-size buckets

• Easy weld-on installation

---

AU GET supplied by AU Buckets & Equipment – Built to protect your investment, dig after dig.

AU GET supplied by AU Buckets & Equipment

This Komatsu-style five-hole side cutter is designed to suit PC400 series excavators, providing essential bucket side protection against wear and impact. Built from high-strength alloy steel, it extends bucket life and improves penetration efficiency in abrasive or high-impact digging environments.

Product Specifications:

• Part Numbers: 208-70-34160 (LH) / 208-70-34170 (RH)

• Machine Fitment: Komatsu PC400

• Shape: Five-Hole Side Cutter

• Weight: 22.5 kg

• Hardness: 48–52 HRC

• Impact Value: >20 J

• Material: Heat-treated, abrasion-resistant alloy steel

Key Features:

• Five-bolt mounting for a strong, secure fit

• Protects the bucket side walls and improves overall cutting performance

• Suitable for heavy-duty applications including quarrying, trenching, and earthworks

• Compatible with OEM Komatsu buckets and AU Buckets edge systems

AU GET supplied by AU Buckets & Equipment – side protection you can trust for serious digging.

AU GET Supplied by AU Buckets & Equipment The 329-5955 is a Caterpillar-style wing shroud / side protector, built to guard the sidewalls and cheeks of large buckets against heavy wear and impact. This model is designed to fit buckets with a 50mm gap and is secured using a 132-1008 pin and 132-0999 retainer, ensuring a reliable and easy-to-service locking system. Key Features: Suits 50mm side gap clearance Takes 132-1008 pin and 132-0999 retainer Weld-on or mechanically retained (depending on setup) Heavy-duty cast design for maximum wear protection Also referred to as: Goanna bar, cheek protector, vertical wear shroud Common Machine Fitment: CAT: 374D L, 374F L, 375 L 385B, 390D, 390D L 990H, 992K (Confirm dimensions before use on non-OEM buckets) Applications: Designed for mining, quarrying, and high-abrasion sites Protects bucket side plates from impact and structural damage Extends bucket service life and reduces rebuild downtime All AU GET parts are HARDENED to deliver reliable performance under tough Australian conditions. Stocked at our Welshpool WA warehouse. Ask us about bulk supply, side cutter kits, or full G.E.T. packages.

e SCB-70-250 is a heavy-duty weld-on lip shroud designed to protect bucket lips ranging from 60mm to 75mm thick. Ideal for demanding earthmoving, quarrying, and mining applications, this shroud provides extended wear life and edge protection on excavator and loader buckets. Model: SCB-70-250 Lip Size Compatibility: Suits 60mm to 75mm thick bucket lips Width: 250mm coverage Mounting: Weld-on application Design: Curved profile for enhanced lip coverage and ground penetration Material: Cast high-tensile alloy steel for superior abrasion resistance Application: Suitable for general purpose to heavy-duty buckets Weld directly to the bucket lip for maximum protection and extended service life.

Part Number: 207-70-34170 Machine Model: Komatsu PC300 Type: LH (Left-Hand) Side Cutter Material: High-strength steel for maximum wear resistance Application: Improves digging efficiency and reduces bucket wear

AU GET supplied by AU Buckets & Equipment

This heavy-duty right-hand corner protector is designed for buckets using the J300 series tooth system, typically found on CAT 950 to 963 models. Built for durability in high-wear zones, it shields the outer corners of the bucket lip from impact and abrasion, significantly extending the service life of your bucket.

Product Specifications:

• Application: Right-hand corner protector

• Tooth System Compatibility: CAT J300

• Machine Fitment: CAT 950 to 963 series

• Mounting Hardware:

  • Bolts: 2 × 1¼" x 3½" (125 x 350) plow bolts

  • Nuts: 2 × 1¼" (125 HEX) hex nuts

• Material: Cast high-strength alloy steel

• Installation: Bolt-on

Key Features:

• Reinforced design for high-impact resistance

• Protects the bucket’s lip and corner welds from excessive wear

• Easy bolt-on installation for quick field replacement

• Compatible with CAT OEM and AU Buckets edge systems

AU GET supplied by AU Buckets & Equipment – protecting your investment one corner at a time.

AU GET supplied by AU Buckets & Equipment

This Komatsu-style left-hand sidecutter is designed for PC200 series excavators, offering added bucket edge protection and extended wear life in abrasive digging conditions. Mounted on the left side of the bucket, it shields the corner and side wall from impact and wear—ideal for trenching, general excavation, and quarry work.

Product Specifications:

• Position: Left-Hand

• Machine Fitment: Komatsu PC200

• Application: Bucket edge protection in abrasive or high-impact ground

• Material: Cast, wear-resistant alloy steel

• Mounting: Bolt-on (bolts sold separately; configuration varies)

Key Features:

• Protects bucket corner and side wall from wear and impact

• Enhances bucket performance and lifespan

• Direct-fit for PC200 OEM and AU Buckets sidecutter-compatible buckets

• Ideal for use in rocky, sandy, or high-wear environments

AU GET supplied by AU Buckets & Equipment – protect your edge, extend your dig.

AU GET supplied by AU Buckets & Equipment

This Komatsu-style left-hand sidecutter is designed for PC200 series excavators, offering added bucket edge protection and extended wear life in abrasive digging conditions. Mounted on the left side of the bucket, it shields the corner and side wall from impact and wear—ideal for trenching, general excavation, and quarry work.

Product Specifications:

• Position: Left-Hand

• Machine Fitment: Komatsu PC200

• Application: Bucket edge protection in abrasive or high-impact ground

• Material: Cast, wear-resistant alloy steel

• Mounting: Bolt-on (bolts sold separately; configuration varies)

Key Features:

• Protects bucket corner and side wall from wear and impact

• Enhances bucket performance and lifespan

• Direct-fit for PC200 OEM and AU Buckets sidecutter-compatible buckets

• Ideal for use in rocky, sandy, or high-wear environments

AU GET supplied by AU Buckets & Equipment – protect your edge, extend your dig.